Refrigerant Recovery Pro is reader-supported: some links on this page are affiliate links, and as an Amazon Associate Refrigerant Recovery Pro earns from qualifying purchases at no extra cost to you. Learn more.
Vidapool VTX016 32000 Gallons Pool Heat Pump
The Vidapool VTX016 heats 32,000 gallons of water, so it suits you if you need a high-capacity backyard heater.
110,000 BTU heating capacity
- Heating Capacity
- 110,000 BTU
- Pool Volume Capacity
- 32,000 Gallons
- COP (Coefficient of Performance)
- 16 – at or above the COP (Coefficient of Performance) 4.0+ reference figure
1 deciding spec not stated
- Operating Voltage
- Not stated in the listing – confirm with the seller before ordering
Suits homeowners with large residential pools
- Homeowners with large residential pools
- Eco-conscious homeowners
- Tech-savvy pool owners
- Noise-sensitive neighbors
$1,464 over the category median
- This Swimming Pool Heat Pump
- $2564.04
- Median of the 29 Swimming Pool Heat Pumps we screened
- $1099.99
- Range
- $498 to $6499.99
- Cheaper than this one
- 23 of those 29
The Vidapool VTX016 in Short
Vidapool VTX016 Heat Pump heats up to 32,000 GAL of water using a 110,000 BTU capacity, making it suitable for owners of large residential pools.
A COP of 16 means this unit produces 16 units of heat for every 1 unit of electricity consumed, which is a high efficiency rating for a pool heater. This level of energy efficiency helps reduce the long-term costs of maintaining a consistent water temperature during the colder months.
The Vidapool VTX016 achieves this efficiency through an air-source heat exchange and an inverter compressor. It also includes smart app control and mobile phone scheduling to help you manage your heating cycles remotely.
We evaluated 29 swimming pool heat pumps and selected this model for a full review because it was among the most-rated products that pass screening, with 64 buyer ratings. This review is for shoppers who prioritize energy efficiency and smart features. Our full review is based on research of listing data.
How Refrigerant Recovery Pro picked: we started from the 200 most-reviewed swimming pool heat pump listings in our retail dataset, removed duplicates, accessories and off-category products, and 29 qualified. This product is one of 15 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
The Short Answer on the Vidapool VTX016
Best for: you need a heat pump to heat a 5,000 gallon above ground pool or maintain a large pool temperature overnight.
The Vidapool VTX016 is a capable choice at the $2564.04 price point.
- Pro: The 110,000 BTU heating capacity provides sufficient output for smaller pool volumes.
- Pro: Intelligent inverter control allows for dynamic power adjustment to maintain set temperatures.
- Pro: Smart app control and mobile phone scheduling allow for remote operation.
- Con: The 110,000 BTU output is only sufficient for the lower end of the 15,000 gallon heating range.
- Con: The 32,000 gallon capacity limit restricts use for larger residential installations.
Don’t buy this if: you need to heat a pool larger than 15,000 gallons, as the 110,000 BTU capacity may fail to raise temperatures during cold nights.
Price assessment: The $2564.04 price is fair for a unit featuring inverter technology and smart app integration.
Refrigerant Recovery Pro score: 6.5/10 (data-driven – see “How we picked” above)
Owners seeking remote access should see how to find the best swimming pool heat pump with wifi control.
Key Specifications for this Swimming Pool Heat Pump
| Heating Capacity | 110,000 BTU |
| Pool Volume Capacity | 32,000 Gallons |
| Operating Voltage | Not stated |
| COP (Coefficient of Performance) | 16 |
| Noise Level | 30dB |
| Compressor Type | Inverter |
| Heating and Cooling | Yes |
| Smart App Control | Yes |
The COP (Coefficient of Performance) of 16 measures the efficiency of heat produced relative to electricity consumed.
Before You Buy: Swimming Pool Heat Pump Checklist
The first thing to check is your pool’s total volume to ensure the heating capacity matches your needs. If the unit is under-sized for your pool volume, it will run 24/7 but fail to raise the temperature during cold nights or low solar gain.
- ✓ Confirm your pool volume is under 32,000 gallons — if your pool is larger, the Vidapool VTX016 will fail to heat the water effectively.
- ✓ Verify your heating needs are under 110,000 BTU — if you need more than this for a 15,000 gallon pool, the unit will only provide heat at the lower end of that range.
- ✓ Check your current pipe diameter — improper flow rate or pipe diameter creates excessive pressure drop or insufficient water turnover to allow for heat transfer.
- ✓ Measure your available space for a 246-pound unit — if the 18 x 14 x 9 inch footprint doesn’t fit your area, you will need to relocate the installation site.
- ✓ Confirm your power supply is compatible with the required voltage — using an incorrect voltage will prevent the heat pump from powering on.
You should not buy this product if you have a pool larger than 32,000 gallons or if you require a heating capacity exceeding 110,000 BTU.
What the Numbers Mean in Use
Dynamic Power Adjustment for Temperature Stability
The Vidapool VTX016 provides enough heating capacity to maintain a large pool temperature overnight, as it provides 110,000 BTU of heat output. This capacity is sufficient to meet the 80,000 to 120,000 BTU requirement for consistent overnight heating, though it sits at the easier end of that range for very large bodies of water. Will it heat your 32,000 gallon pool fast enough during the week? The 110,000 BTU output provides enough energy to heat a 15,000 gallon inground pool at the lower end of the required 100,000 to 150,000 BTU range.
Intelligent inverter control allows the Vidapool VTX016 to perform dynamic power adjustment, which is the ability to vary electricity use based on the current temperature. This allows the unit to maintain a steady temperature without the constant cycling of older systems. Because the unit also supports heating and cooling, you can use this power adjustment to manage both water warming and cooling cycles depending on the season.
High Efficiency Air-Source Heat Exchange
The Vidapool VTX016 utilizes an air-source heat exchange system to move heat from the outside air into the water. This process allows for up to 70% savings compared to natural gas heaters by extracting existing thermal energy from the environment. By using this method, you reduce the amount of raw energy required to reach your desired water temperature.
The Vidapool VTX016 achieves a COP of 16, which is the efficiency ratio of heat produced relative to electricity consumed. This figure is at or above the 4.0+ efficiency benchmark where a unit produces 4 units of heat for every 1 unit of electricity. This high efficiency means the unit can handle a 5,000 gallon above ground pool with significant energy overhead to spare.
Whisper Quiet 30dB Operation
The Vidapool VTX016 operates at a noise level of 30dB, which is a measurement of sound pressure in decibels. This low output level allows the heat pump to run near your pool area without creating significant auditory disruption. At 30dB, the unit remains much quieter than many other options in the category that state noise levels as high as 4,758dB.
The Vidapool VTX016 includes smart app control and mobile phone scheduling to manage your heating cycles remotely. You can set specific operating times through your phone to ensure the unit runs during periods when noise is less of a concern or when electricity rates are lower. These features allow you to balance your heating needs with your personal preferences for backyard quiet.
The Vidapool VTX016 Job by Job: What Its Figures Cover
The Vidapool VTX016 against the jobs buyers ask about, worked out from its listed heating capacity and a typical need for each job.
| Job | What it takes | Vidapool VTX016 |
|---|---|---|
| Heat a 15,000 gallon inground pool | at least 100,000 to 150,000 BTU | Only at the easier end of that range – 110,000 BTU |
| Maintain a large pool temperature overnight | at least 80,000 to 120,000 BTU | Only at the easier end of that range – 110,000 BTU |
| Provide heating and cooling for a pool | at least 40,000 to 150,000 BTU | Only at the easier end of that range – 110,000 BTU |
| Heat a 5,000 gallon above ground pool | at least 40,000 to 60,000 BTU | Yes – 110,000 BTU |
How the Vidapool VTX016 Compares to Alternatives
When you need to maintain a large swimming pool temperature overnight, the Vidapool VTX016 provides 110,000 BTU of heating capacity. This output is sufficient to heat a 15,000 gallon inground pool at the lower end of the required 100,000 to 150,000 BTU range.
The COP (Coefficient of Performance) of 16 for the Vidapool VTX016 is the highest of the three models we compared that state this figure. COP measures the efficiency of heat produced relative to electricity consumed, and a value of 16 means this unit produces 16 units of heat for every 1 unit of electricity. This ranks at or above the 4.0+ efficiency benchmark used to identify the point where a unit produces 4 units of heat for every 1 unit of electricity.
The Vidapool VTX016 holds the largest pool volume capacity of the five models that state a figure, supporting up to 32,000 gallons. This capacity allows for larger water volumes than the 15,000 to 30,000 gallon limits of other options in our review.
- The Vidapool VTX016 matches the WOPOLTOP RCDF-035 swimming pool heat pump at the $2564.04 price point.
- The 58000 BTU Inverter Air-Source Swimming Pool Heat Pump is $584.94 cheaper than the Vidapool VTX016.
- The Vidapool VTX016 has the largest COP of 16 among the models that provide this specific measurement.
If you need to heat a 5,000 gallon above ground pool for a lower price, the FibroPool FH270 70,000 BTU Heat Pump is $614.05 cheaper than the Vidapool VTX016.
What the deciding spec costs here: Measured as price per unit of Heating Capacity, the reviewed product works out to $0.02 against a $0.04 median across the 21 other screened products that state the spec, and 1 of them deliver more of it per dollar. The cheapest screened product that beats its 110,000 BTU is the WOPOLTOP RCDF-035 at $2564.04 with 119000 BTU, which is $0 less than this one for more of the spec that decides this category.
If you are looking for a different brand, see our full review of the Crosswind 40i.
You might also consider looking at the ECOPOOLTECH EE100 performance breakdown.
Is the Price Right?
The Vidapool VTX016 provides up to 70% savings compared to natural gas heaters by using an air-source heat exchange to move heat rather than generate it. This efficiency means your monthly electricity bill will stay lower than the cost of burning fuel, similar to how a heat pump in a home uses the outside air to regulate temperature. This technology allows the unit to move heat into the water while using significantly less power than a traditional gas-fired system.
The Vidapool VTX016 is priced at $2564.04, which sits $226 above the $1949.99 to $3099 range of the similar swimming pool heat pump products we compared. At this price point, you get a unit with a COP of 16, which is the efficiency ratio of heat produced relative to electricity consumed. You also gain smart app control and a 30dB noise level, which is among the quieter options in our research. This model is the right buy if you need to heat a pool up to 32,000 gallons and want the specific features of an intelligent inverter control system.
Where this sits in the buyer data: Among the 29 products screened for this category, this one’s 4.2 rating places it #9, on 64 ratings – above the 35-rating median of that group, so the average rests on more feedback than most of its comparables. On price it undercuts 4 of them.
Getting the Vidapool VTX016 Working, and What to Check After
Setting up This Pool Heat Pump
You must have a dedicated electrical power source available before the Vidapool VTX016 can begin heating your water.
- Unpack the 246-pound unit and place it on a level surface near your pool’s plumbing.
- Connect the PVC piping to the inlet and outlet ports to transport water from the pool to the heat pump.
- Install a flow switch to prevent the unit from running without water circulation.
- Connect the power supply to a standard outlet to provide the required voltage for the air-source heat exchange.
- Configure the app remote control to begin scheduling your heating cycles.
Warranty and support: what to check
Warranty coverage and support terms differ by seller and country.
- Confirm the COP (Coefficient of Performance) rating of 16 is functional, as this measures the efficiency of heat produced relative to electricity consumed.
- Verify the inverter control system responds to temperature changes, as this manages the dynamic power adjustment.
- Check that the 30dB noise level meets your backyard requirements, as this defines the sound output during operation.
- Test the smart app connection to ensure you can manage the 110,000 BTU output remotely.
Turn the unit on and run it for one hour to confirm it reaches the target temperature while the return window is still open.
What Buyers Still Want to Know About This Swimming Pool Heat Pump
How much pool volume can the Vidapool VTX016 heat?
The Vidapool VTX016 supports a pool capacity of up to 32,000 gallons. This capacity means the unit is designed to effectively heat large residential volumes, though you should confirm your specific pool’s gallon count matches this limit before ordering.
What is the heating capacity of the Vidapool VTX016?
The Vidapool VTX016 provides a heating capacity of 110,000 BTU. This output level is sufficient to heat a 5,000 gallon above ground pool or maintain a 15,000 gallon inground pool at the lower end of the required heat range.
Does the Vidapool VTX016 have a high COP?
Yes, the Vidapool VTX016 has a COP of 16, which is the Coefficient of Performance (the ratio of heat produced to electricity consumed). This efficiency rating allows the unit to operate with high energy output relative to the power it draws from your home’s electricity.
Can I control the Vidapool VTX016 with my phone?
Yes, the Vidapool VTX016 includes smart app control and mobile phone scheduling. You can use these features to set specific heating schedules or adjust temperatures remotely via a smartphone app.
What is the noise level of the Vidapool VTX016?
The Vidapool VTX016 operates at a noise level of 30dB. This low decibel rating indicates the unit remains quiet enough to run near a patio or seating area without being disruptive.
Does the Vidapool VTX016 provide cooling?
Yes, the Vidapool VTX016 provides both heating and cooling functions. This allows the unit to manage the pool temperature in both summer and winter conditions using its air-source heat exchange technology.
Is the Vidapool VTX016 Right for You?
Who the Vidapool VTX016 suits and the jobs it is the wrong choice for, listed below with the reason for each.
Who this pool heat pump is for, and what it does well
Who this pool heat pump suits
- Homeowners with large residential pools — the 32,000 gallon capacity fits large backyard swimming pools
- Eco-conscious homeowners — the 70% savings compared to natural gas heaters appeals to those looking to reduce carbon footprints
- Tech-savvy pool owners — the APP remote control and mobile phone scheduling allow for remote monitoring and automation
- Noise-sensitive neighbors — the 30dB noise level ensures the unit operates quietly in residential areas
- Budget-conscious pool owners — the $2564.04 price point offers an affordable entry into high-efficiency heat pump technology
What this swimming pool heat pump handles well
- Maintaining consistent pool temperature — the intelligent inverter control allows for dynamic power adjustment
- Heating large bodies of water — the 110,000 BTU heating capacity provides significant output
- Energy-efficient pool heating — the COP of 16 ensures high thermal efficiency
- Remote pool management — the APP remote control and mobile phone scheduling allow for off-site adjustments
- Quiet backyard operation — the 30dB noise level allows for operation near seating areas
What This Swimming Pool Heat Pump is the wrong choice for
- Heating commercial-sized swimming pools — the 32,000 gallon capacity limit is too small for public facilities
- Rapidly heating a cold pool in a short timeframe — the 110,000 BTU capacity is designed for maintenance rather than high-speed heating
- Extreme cold climate heating — the air-source heat exchange technology has limitations in sub-freezing temperatures
What to budget alongside this pool heat pump, and what to skip
- Natural gas supply line — the air-source heat exchange technology eliminates the need for gas fuel
- Manual temperature controller — the intelligent inverter control and APP remote control make manual dials unnecessary
- External scheduling timer — the built-in mobile phone scheduling covers this functionality
Where to Buy This Swimming Pool Heat Pump
In November 2026 the Vidapool VTX016 was listed at $2564.04. Prices move, so read that as a snapshot, not a quote.
Swimming pool heat pumps are sold by the retailers below – we do not track which of them has the Vidapool VTX016 in stock, so check availability and the current price with the retailer before making a trip.
- Wayfair (online only) — broad range of residential pool heating products
- Home Depot (online and physical stores) — large selection of major brands and in-store pickup options
- Lowe’s (online and physical stores) — wide variety of residential models and local store support
- Amazon (online only) — massive selection of brands and easy price comparison
- PoolSupply.com (online only) — specialist retailer with extensive technical knowledge
- Les Schwab Pool & Spa (online and physical stores) — specialist retailer with professional installation and service
- Costco (online and physical stores) — bulk purchasing options and membership pricing
Final Verdict on the Vidapool VTX016
If you need to heat a pool of up to 32,000 gallons, the Vidapool VTX016 is a viable option. This swimming pool heat pump provides a heating capacity of 110,000 BTU, which is enough to heat a 5,000 gallon above ground pool or maintain a larger 15,000 gallon inground pool at the lower end of the required thermal range. Choosing a unit with insufficient BTU results in a heater that runs 24/7 without successfully raising the water temperature during cold nights.
The Vidapool VTX016 features a COP of 16, which measures the efficiency of heat produced relative to electricity consumed. This efficiency rating is at or above the 4.0+ COP benchmark where a unit produces 4 units of heat for every 1 unit of electricity. The system utilizes an intelligent inverter control for dynamic power adjustment, allowing the unit to operate at lower power once the set temperature is reached. It also includes smart app control and mobile phone scheduling for remote operation.
You should choose the Vidapool VTX016 if you need to heat a large backyard pool and want the convenience of mobile scheduling and app-based remote control. It is available for around $2,564.04.
The 4.2 rating from 64 buyers provides a significant sample of user feedback to support this selection. The unit also features a 30dB noise level, which is at the lower end of the range for the other pool heat pumps we evaluated.
Skip it if: You need to heat a pool larger than 15,000 gallons quickly, as the 110,000 BTU capacity may not provide enough rapid heating for high-volume water masses.
Browse our other pool heat pump pages
- Swimming Pool Heat Pumps for Large Pools Compared
- Choosing the Best Swimming Pool Heat Pump with Wifi Control
- The Swimming Pool Heat Pumps That Work Best for Heating and Cooling
- Which Swimming Pool Heat Pump Is Best for 110v Outlets?
- Best Swimming Pool Heat Pumps for 220v Outlets
- The Swimming Pool Heat Pumps That Work Best for Above Ground Pools