Choosing the Best Swimming Pool Heat Pump with Wifi Control: Manage Water Temperatures Via Smartphone Apps

Our Verdict and How We Chose

The right pool heater provides consistent temperature control without the high energy costs associated with non-inverter systems. Achieving a high COP (Coefficient of Performance) ensures that the electricity consumed is efficiently converted into usable heat for the water.

The ECOPOOLTECH EE100 Ultra Inverter Heat Pump achieves a COP of 5.5, making it a highly efficient choice for smaller setups. For those requiring maximum efficiency on a larger scale, the Vidapool VTX016 32000 Gallons Pool Heat Pump offers a COP of 16. The VARMINPOOL V35 Ultra Inverter Pool Heater is the appropriate choice for those needing to heat up to 42,000 gallons.

We selected these models after screening 29 swimming pool heat pumps and comparing 10 models here at Refrigerant Recovery Pro. The prices for these selected units range from $1261.99 to $3899.99, with a median price of $2039.05.

Swimming Pool Heat Pumps with Wifi Control: Price, Rating and Specs Compared

Prices are approximate and move frequently – check the current price before deciding. “Not stated” means the manufacturer listing does not give that figure – we do not estimate it.

Among our top picks, the value leader is Vidapool VTX016 32000 Gallons Pool Heat Pump because it provides the lowest cost per BTU of heating capacity.

Each Pick with Wifi Control, Reviewed in Detail

The 3 picks below are reviewed in the same order as the cards above.

ECOPOOLTECH EE100 Ultra Inverter Heat Pump

The ECOPOOLTECH EE100 Ultra Inverter Heat Pump made the list because it combines inverter technology with WiFi connectivity for smart temperature management. It offers a high COP of 5.5, which is the efficiency ratio of heat produced relative to electricity consumed.

What we like: This unit features an inverter compressor that automatically adjusts its working frequency based on the water temperature to maintain efficiency. It supports WiFi and smart app control, allowing for remote operation and scheduling via a smartphone. The 38,864 BTU/hr heating capacity provides a consistent rate of heat energy transferred into the water every hour.

Keep in mind: This model is designed for in-ground pools up to 8,000 gallons or above-ground pools up to 10,000 gallons, which may limit its use for larger residential installations.

Vidapool VTX016 32000 Gallons Pool Heat Pump

The Vidapool VTX016 32000 Gallons Pool Heat Pump is a high-efficiency option featuring a COP of 16. This high efficiency means it produces significantly more heat per unit of electricity than standard models. It includes smart app control for remote scheduling and power adjustments.

What we like: The 110,000 BTU heating capacity allows for a rapid rate of heat transfer into the water. It utilizes an air-source heat exchange system and an intelligent inverter control that adjusts power dynamically as the water reaches the set temperature. The 30dB noise level is lower than the 50dB median for this category.

Keep in mind: While it offers high efficiency, the listing does not state WiFi connectivity, which may be a factor for those seeking a fully internet-connected system.

VARMINPOOL V35 Ultra Inverter Pool Heater

The VARMINPOOL V35 Ultra Inverter Pool Heater is selected for its high heating capacity and robust inverter system. It is designed to handle large volumes while providing the smart features of WiFi and remote on/off controls.

What we like: With a heating capacity of 140,000 BTU, this unit provides a high rate of heat energy transfer for large bodies of water. The 330 3D coil evaporator—the core component where the heat exchange happens—is designed for high-volume output. It operates at a 220240V voltage and features a 47dB noise level.

Keep in mind: This model has a weight of 275 pounds, making it a heavy unit that requires significant clearance for installation.

Consult the buying guide to learn the essential criteria for selecting the right heat pump.

Compare all models side by side in the comparison table to see the technical differences.

Find information on setup and warranty to understand the installation process and manufacturer support.

You can also find our full AQUASTRONG HEX012-001 spec breakdown for smaller pool setups.

The Specs That Decide a Pool Heat Pump with Wifi Control

Wifi connectivity range for remote pool heat pump temperature adjustments

Choose a model that supports WiFi to allow for remote temperature adjustments without needing to be near the unit. The ECOPOOLTECH EE100 Ultra Inverter Heat Pump and the VARMINPOOL V35 Ultra Inverter Pool Heater both state WiFi connectivity, which enables smartphone control. While range depends on your home network’s signal strength, these models provide the foundation for remote monitoring. A standard Wi-Fi app allows for direct control via a proprietary phone app, whereas smart home integrations like Alexa or Google Home (which are not stated for these models) would allow for voice commands.

Smart app interface usability for managing pool water temperatures

Prioritize models with smart app control to manage your pool temperature from anywhere. The Vidapool VTX016 32000 Gallons Pool Heat Pump, the VARMINPOOL V35 Ultra Inverter Pool Heater, and the ECOPOOLTECH EE100 Ultra Inverter Heat Pump all state they include smart app control. This feature allows you to monitor the system and make changes via your mobile device. While the specific interface design is not stated, these models provide the necessary software link to manage the hardware remotely.

Remote scheduling features for automating pool heating cycles

Look for remote scheduling to automate your heating cycles and save on energy costs. The VARMINPOOL V35 Ultra Inverter Pool Heater specifically states it supports remote temperature adjustment, scheduling, and remote on/off functions. Scheduling allows you to set the pool to reach a specific temperature by a certain time each day. This functionality is a key differentiator for users who want to balance comfort with energy efficiency without manual intervention.

Inverter efficiency ratings for variable pool heat pump power output

Select an inverter system to ensure the pump adjusts its power output based on the actual heat needed. All three of our selected models—the ECOPOOLTECH EE100 Ultra Inverter Heat Pump, the VARMINPOOL V35 Ultra Inverter Pool Heater, and the Vidapool VTX016 32000 Gallons Pool Heat Pump—utilize inverter technology. This technology varies the compressor speed to maintain steady temperatures more efficiently than fixed-speed models. The Vidapool VTX016 32000 Gallons Pool Heat Pump states a COP (Coefficient of Performance) of 16, which is the efficiency ratio of heat produced relative to electricity consumed. A COP of 4.0+ is the industry benchmark where a unit produces 4 units of heat for every 1 unit of electricity.

Intelligent control systems for real-time pool temperature maintenance

Check for intelligent control systems to maintain your desired temperature automatically. The ECOPOOLTECH EE100 Ultra Inverter Heat Pump features an intelligent control IC to maintain the set temperature, while the Vidapool VTX016 32000 Gallons Pool Heat Pump uses intelligent inverter control for dynamic power adjustment. These systems monitor the water and adjust the heat output to prevent overshooting or underheating. For your specific pool size, you must match the heating capacity to your volume. For example, the VARMINPOOL V35 Ultra Inverter Pool Heater provides 140,000 BTU, which is the rate of heat energy transferred into the water per hour. If a unit is under-sized for your pool volume, the heater will run constantly but fail to raise the temperature during cold periods.

For larger volumes, look at how the KSPF-005L3R1A1 Heat Pump performs.

What Each Job Calls For vs What These Picks State

Match the job you actually need done to the figure it calls for, then check which picks state that figure or more. Where none do, the row says so.

These figures are the levels this category is generally held to, not manufacturer claims. A pick at or above a figure states that number; how it reaches it and the rest of your setup still decide the job, so check them against your own workload before buying.

Who Buys Swimming Pool Heat Pumps, and What It Really Costs

Consider exploring the alternatives to a swimming pool heat pump if you need a different heating method.

What These Pool Heat Pumps Need, and What to Check on Arrival

Power and connectivity requirements for inverter pool heat pump systems

The ECOPOOLTECH EE100 Ultra Inverter Heat Pump, VARMINPOOL V35 Ultra Inverter Pool Heater, and Vidapool VTX016 32000 Gallons Pool Heat Pump all require an inverter system to manage compressor frequency based on water temperature.

The Vidapool VTX016 32000 Gallons Pool Heat Pump does not state WiFi connectivity, so you must ensure your existing remote control setup meets your needs before ordering. The ECOPOOLTECH EE100 Ultra Inverter Heat Pump and VARMINPOOL V35 Ultra Inverter Pool Heater both state WiFi, which allows for smart app control and remote scheduling.

The Vidapool VTX016 32000 Gallons Pool Heat Pump provides a COP (Coefficient of Performance) of 16, which measures the efficiency of heat produced relative to electricity consumed. This high efficiency helps maintain a consistent temperature during a long night swim in a 32,000-gallon pool.

Dedicated power sources and stable surfaces for heat pump pre-installation

All three models require a dedicated power source and a stable surface for mounting before they can begin heating your water.

• The VARMINPOOL V35 Ultra Inverter Pool Heater requires a 220-240V power supply, which is a high-voltage circuit required for high-capacity heating.
• The Vidapool VTX016 32000 Gallons Pool Heat Pump requires an ETL certification for safety and compliance in your region.
• The ECOPOOLTECH EE100 Ultra Inverter Heat Pump is sized for above-ground pools up to 10,000 gallons or in-ground pools up to 8,000 gallons.

Verifying physical dimensions and warranty terms upon heat pump arrival

Warranty coverage and return policies differ by seller and country, so verify your specific terms before the return window closes.

• Confirm the unit’s physical dimensions, such as the 28.7 x 28.7 x 38.6 inches of the VARMINPOOL V35 Ultra Inverter Pool Heater, to ensure it fits your designated space.
• Verify the presence of the smart app control interface for the ECOPOOLTECH EE100 Ultra Inverter Heat Pump to ensure you can connect it to your Wi-Fi Gateway, the device required for remote connectivity.
• Check that the heat exchanger and housing are free of shipping damage, as these components are difficult to service once the unit is mounted.

Once the unit arrives, perform a dry run of the smart app connection to confirm your smartphone can trigger the power state before the installer begins the permanent mounting.

View our top picks for a quick glance at the highest-rated units available today.

Review the article scope to understand which brands and models are included in this roundup.

Visit the FAQ for quick answers to common questions about wifi connectivity and heating.

Buying Questions About Swimming Pool Heat Pumps with Wifi Control, Answered

How much extra does a heat pump cost for Wi-Fi?

The cost for a pool heat pump with Wi-Fi varies based on the heating capacity required for your specific pool volume. The ECOPOOLTECH EE100 Ultra Inverter Heat Pump, which supports 10,000 gallons, is priced around $1,261.99, while the 140,000 BTU VARMINPOOL V35 Ultra Inverter Pool Heater costs around $3,899.99.

Are there monthly subscription fees for Wi-Fi features?

None of the swimming pool heat pumps in our comparison state a requirement for monthly subscription fees to access smart app control or remote monitoring—the ability to check status or adjust settings from a distance. Each selected model provides these features as part of the initial purchase price.

Which wifi enabled pool heater suits a large commercial spa?

The pool heat pump that suits a large commercial spa is the VARMINPOOL V35 Ultra Inverter Pool Heater due to its 140,000 BTU heating capacity. This model supports up to 42,000 gallons and is designed for use in hotels, gyms, and spas.

Which smart pool temperature control is best for a 10,000 gallon pool?

The smart pool temperature control that is best for a 10,000 gallon pool is the ECOPOOLTECH EE100 Ultra Inverter Heat Pump. It provides a COP (Coefficient of Performance) of 5.5, which is the efficiency ratio of heat produced relative to electricity consumed.

Explore our detailed reviews to see an in-depth breakdown of every model featured in this guide.

Check the technical requirements to ensure your pool meets the necessary power and size specifications.

See the buyer’s checklist to identify which specific model best matches your personal needs.

Who Should Skip These Pool Heat Pumps

If you need to heat a 100,000 gallon pool with wifi, these three picks are the wrong tool. None of the models listed reach the 1,000,000 BTU required to heat a volume of that scale effectively.

You should instead look for commercial-grade industrial heat pumps designed for high-volume water displacement. If you are looking for a smaller setup, see the best swimming pool heat pump for small pools.