Will the Gen II Ranein RV Tankless Water Heater fit my existing RV cutout?

Refrigerant Recovery Pro is reader-supported: some links on this page are affiliate links, and as an Amazon Associate Refrigerant Recovery Pro earns from qualifying purchases at no extra cost to you. Learn more.

The Ranein RA65EH Gen II 65,000 BTU fits your existing RV cutout because the unit measures 15″W x 15″H.

Ranein RA65EH Gen II 65,000 BTURanein RA65EH Gen II 65,000 BTU4.4/5 from 681 ratings

Check the Ranein RA65EH Price

You must verify that your mounting area provides a 15×15 inch clearance to accommodate the outer footprint of the heater and the RV mounting brackets. Measure your available space before ordering to ensure the chassis sits flush against the wall.

Ranein RA65EH dimensions and 12V DC power requirements

The Ranein RA65EH provides 65,000 BTU of heat output, which is the total heat energy produced per hour to heat water on demand. Because RV tankless water heater builds often involve tight cabinetry, confirming the 15″W x 15″H dimensions is vital to prevent the unit from protruding into your living space or blocking access. We selected this model for our comparison based on its 12 Volts (DC) input, which allows it to run from a house battery bank without an inverter. While the Ranein RA65EH includes a top-mounted exhaust fan for flue venting—the system that carries combustion gases away—the specific diameter and length of the required exhaust venting pipe are not stated. You should confirm your existing vent diameter is compatible with the unit’s output before installation.

You can find the technical specifications in our Ranein RA65EH spec breakdown.

What to Check Before Buying the Ranein RA65EH

Confirming these physical constraints ensures the heater functions without tripping safety sensors or obstructing your RV’s interior layout.

For a deeper look at output, see how the Ranein RA65EH performs.

  • Verify the mounting area can accommodate the 15″W x 15″H footprint including the RV mounting brackets.
  • Ensure your RV’s plumbing provides a consistent flow to reach the 3.9 Gallons Per Minute maximum flow rate.
  • Confirm your 12 Volts (DC) electrical system can handle the 46 watts required for the ignition system.
  • Check that your exterior wall allows for the top-mounted exhaust fan to vent safely.
  • Verify that your local plumbing pressure meets the requirements for the unit to maintain a 124 Degrees Fahrenheit maximum temperature.

Comparing the Ranein RA65EH to Other Options

The Ranein RA65EH is a compact, wall-mounted propane heater that provides instant hot water for showers and sinks. Buyers who prioritize a compact footprint and 12V DC compatibility will find this model suitable for most standard RV layouts. However, if you require a higher flow rate than 3.9 Gallons Per Minute or need to heat water for multiple high-demand fixtures simultaneously, you may need to look at larger units with higher BTU outputs. Those seeking a high-end professional standard may also consider units that emulate the Bosch Trima benchmark for extreme flow consistency.

If you are still deciding, see our guide to the best rv tankless water heater for travel trailers.

If you have a standard 15×15 inch cutout and require a 12V DC compatible system, the Ranein RA65EH is a practical choice for your RV. This unit is a strong fit for owners who need a reliable, space-efficient heating solution that fits within common camper dimensions.