MICOE MSHP-005Y1 Swimming Pool Heat Pump Review: Cuts Energy Costs by 40% for Above Ground Pools

MICOE MSHP-005Y1 Overview

MICOE MSHP-005Y1 Pool Heat Pump heats a 5,000-gallon above ground pool for users needing a 17,000 BTU heating capacity.

Maintaining a consistent 104F maximum water temperature allows for a comfortable swimming experience even during cooler months. This specific temperature ceiling is dictated by the unit’s internal design and thermal limits.

The MICOE MSHP-005Y1 reaches this goal by delivering 17,000 BTU of heat output. It also features a 50dB(A) noise level, which helps keep the backyard environment quiet while the pump operates.

We evaluated 29 swimming pool heat pumps and selected the 15 models on this page for a full review based on buyer ratings. The MICOE MSHP-005Y1 was included because it has 35 buyer ratings, the 15th most of the 29 screened. Our full review focuses on the technical specifications of the products we compared.

If you require a higher output, see our full EU-PLC57100-E Heat Pump review.

The Short Answer on the MICOE MSHP-005Y1

Best for: you need to heat a small above-ground pool during the spring or summer months while keeping electricity costs lower than a standard heater.

The MICOE MSHP-005Y1 is a viable option for these conditions at the $699 mark.

• Pro: Titanium heat exchanger material provides resistance to corrosion and chemical degradation over time.
• Pro: The 50dB(A) noise level is among the quieter options for outdoor operation.
• Con: The 17,000 BTU heating capacity is insufficient to heat a 5,000-gallon pool, meaning it cannot reach target temperatures for that volume.
• Con: The 3,000-gallon limit for late autumn and winter restricts its use to smaller volumes during colder months.

Don’t buy this if: you need to heat a pool larger than 3,000 gallons during the late autumn or winter months.

Price assessment: The $699 price is low for a unit featuring a titanium heat exchanger.

For high-volume requirements, view our 58000 BTU Heat Pump breakdown.

Full Technical Specifications for the 17,000 BTU Heat Pump

The Heating Capacity of 17,000 BTU measures the rate of heat energy transferred into the water per hour.

New users can learn swimming pool heat pump terms and specs to better understand technical requirements.

Before You Buy: Pool Heat Pump Checklist

The first thing to check is the heating capacity, as this unit provides 17,000 BTU which is significantly lower than the 40,000 to 60,000 BTU required to heat a 5,000-gallon above ground pool.

• ☐ Confirm your pool volume is under 3,000 gallons — if your pool is larger, the unit will run 24/7 but fail to raise the temperature during cold nights or low solar gain.
• ☐ Verify your required heating capacity is 17,000 BTU or less — ordering a unit with lower output than your pool’s needs results in a heater that cannot reach your target temperature.
• ☐ Measure your pipe diameter to ensure proper flow rate — an undersized pipe creates a pressure drop that prevents sufficient water turnover for heat transfer.
• ☐ Check your power supply requirements — confirm your electrical setup supports the operating voltage required for the MICOE MSHP-005Y1.
• ☐ Budget for a 74.8-pound unit — ensure your delivery area can accommodate the weight of the package.

You should not buy this pool heat pump if you need to heat a pool larger than 3,000 gallons or require heating and cooling for your water.

What These Specifications Let You Do

Rapid Heating Speed

The MICOE MSHP-005Y1 heats water 50% faster than standard electric heaters, which allows you to raise the temperature for a quick morning swim more efficiently than a basic resistance system. This speed is tied to the 17,000 BTU heating capacity, which measures the rate of heat energy transferred into the water per hour. If you need to raise the temperature by a few degrees quickly, this 17,000 BTU output provides the necessary throughput for smaller volumes.

This heating speed is limited by the 3,000-gallon capacity for late autumn and winter use. Because the unit provides 17,000 BTU, it is not sufficient to maintain a large pool temperature overnight or heat a 15,000-gallon inground pool, as those tasks require 80,000 to 120,000 BTU. You should check your pool’s total gallon capacity; if it exceeds 3,000 gallons during colder months, this unit will not provide enough heat to keep the water warm overnight.

Reducing energy costs by 40% through heat pump efficiency

The MICOE MSHP-005Y1 provides a 40% reduction in energy costs compared to traditional heating methods. This efficiency is a result of the heat pump design, which moves existing heat into the water rather than generating it through raw electricity. This reduction allows you to maintain a consistent temperature while lowering the monthly utility impact on your budget.

The 40% reduction applies to the energy used to generate the 17,000 BTU of heat. Because this unit is designed for above-ground pools, the efficiency is maximized when the water volume is kept within the stated 5,000-gallon limit. For larger volumes, the energy required to heat the water would exceed the unit’s capacity, meaning the 40% savings only applies to the specific workloads the 17,000 BTU rating can support.

Installing this pool heat pump in 15 minutes without tools

The MICOE MSHP-005Y1 features a 15-minute installation time because it includes a complete installation kit and tutorial manuals. This design allows you to set up the pool heat pump without needing a specialized technician or heavy machinery. The included components ensure you have the necessary parts to begin the setup immediately upon delivery.

While the 15-minute timeframe applies to the basic setup of the unit, you must confirm your pool’s plumbing requirements before ordering. Since this is a job for a qualified installer wherever local rules require one, you should verify that your existing pipes can support the required flow rate for a 17,000 BTU system. The 74.8-pound weight of the unit makes it manageable for a two-person move to its final location near your pool.

The MICOE MSHP-005Y1 Job by Job: What Its Figures Cover

The MICOE MSHP-005Y1 against the jobs buyers ask about, worked out from its listed heating capacity and a typical need for each job.

The MICOE MSHP-005Y1 Against Similar Swimming Pool Heat Pumps

This output allows the unit to heat a 5,000-gallon above ground pool, though it is not sufficient to heat a 15,000-gallon inground pool or maintain a large pool’s temperature overnight.

How it compares to a standard electric heater

The MICOE MSHP-005Y1 offers a 40% energy cost reduction compared to standard electric heaters. While a standard electric heater provides constant heat, this pool heat pump uses a heat exchanger to move existing heat into the water more efficiently. This efficiency means the unit uses less electricity to achieve the same thermal results as a resistive heating element.

How this pool heat pump compares to other models in price and capacity

The MICOE MSHP-005Y1 has the highest heating capacity among the comparable models listed in our review.

• The VARMINPOOL 18450 BTU 110V Pool Heat Pump is $50 cheaper than this model.
• The Varpoolfaye KSPF-005L3R1A1 5,500 Gallon Heat Pump is $74.01 cheaper than this model.
• The VARMINPOOL KSPF-005L3R1A1 Pool Heat Pump is $99.01 cheaper than this model.
• The Electric Heat Pump Pool Heater is $149.51 cheaper than this model.
• The POOLCOMFT Above Ground Pool Heater PLC70 matches this model at the $699 price point.

If you need a lower entry price point for a 5,000-gallon pool, the VARMINPOOL KSPF-005L3R1A1 Pool Heat Pump is a more affordable alternative.

Many homeowners prefer high-voltage power, so compare the best swimming pool heat pump for 220v outlets.

Setting Up This Swimming Pool Heat Pump, and What Support Covers

Setting up the MICOE MSHP-005Y1

You must have a functional electrical power source before the MICOE MSHP-005Y1 can begin heating water. This pool heat pump requires a connection to your home’s electrical system to provide the necessary power for the 17,000 BTU heating capacity. Will this unit handle my specific pool volume? The MICOE MSHP-005Y1 is designed to heat up to 3,000 gallons during late autumn and winter, though it can manage 5,000 gallons during the spring and fall months.

1. Unpack the unit and the included installation kit.
2. Connect the PVC piping to the intake and outlet ports to transport water from the pool to the heat pump.
3. Mount the unit in a designated outdoor space with a footprint of 15.3 x 16.9 x 17.3 inches.
4. Attach the flow switch to the piping to ensure the unit does not run without water circulation.
5. Connect the power cable to your electrical source and turn the unit on.

Warranty and Support: What to Check

Warranty coverage and support terms differ by seller and country. Before your return window closes, confirm these specific details to ensure the unit performs as expected:

• Verify the titanium heat exchanger is free of debris, as this material is the primary component for heat transfer and is difficult to service.
• Check that the 50dB(A) noise level matches your expectations for your specific outdoor environment.
• Confirm the unit reaches a maximum water temperature of 104F to ensure it meets your heating requirements.

The first thing to do the day the MICOE MSHP-005Y1 arrives is to power it on and verify that the water begins to circulate through the PVC piping.

MICOE MSHP-005Y1 Buying Questions Answered

How much will it cost to run the MICOE MSHP-005Y1 daily?

The MICOE MSHP-005Y1 reduces energy costs by 40% compared to standard electric heaters. Because the specific daily electricity consumption is not stated in the research, you should calculate your expected costs based on your local utility rates and the 17,000 BTU heating capacity.

What is the heating capacity of the MICOE MSHP-005Y1?

The MICOE MSHP-005Y1 provides a heating capacity of 17,000 BTU.

Can the MICOE MSHP-005Y1 heat a large inground pool?

No, the MICOE MSHP-005Y1 is not designed to heat a large inground pool. The 17,000 BTU heating capacity is significantly lower than the 100,000 to 150,000 BTU typically required for a 15,000-gallon inground pool.

What is the noise level of the MICOE MSHP-005Y1?

The MICOE MSHP-005Y1 operates at a noise level of 50dB(A). This rating places the unit within the range of the 10 evaluated models that specify noise, which vary from 30 to 4,758dB.

Is the MICOE MSHP-005Y1 Right for You?

Who the MICOE MSHP-005Y1 suits and the jobs it is the wrong choice for, listed below with the reason for each.

Where to Buy This Pool Heat Pump

In November 2026 the MICOE MSHP-005Y1 was listed at $699. Prices move, so read that as a snapshot, not a quote.

Swimming pool heat pumps are sold by the retailers below – we do not track which of them has the MICOE MSHP-005Y1 in stock, so check availability and the current price with the retailer before making a trip.

• Wayfair (online only) — broad range of residential pool heating products
• Home Depot (online and physical stores) — large selection of major brands and in-store pickup options
• Lowe’s (online and physical stores) — wide variety of residential models and local store support
• Amazon (online only) — massive selection of brands and easy price comparison
• PoolSupply.com (online only) — specialist retailer with extensive technical knowledge
• Les Schwab Pool & Spa (online and physical stores) — specialist retailer with professional installation and service
• Costco (online and physical stores) — bulk purchasing options and membership pricing

Final Verdict on the MICOE MSHP-005Y1

You should choose the MICOE MSHP-005Y1 if you need a compact pool heat pump to maintain a small above-ground pool during the spring and fall months for around $699. This unit is designed for smaller water volumes and provides a specific heating capacity that fits a targeted use case.

The MICOE MSHP-005Y1 provides 17,000 BTU of heating capacity. This figure represents the rate of heat energy transferred into the water per hour. Because this capacity is lower than the 40,000 to 60,000 BTU typically required to heat a 5,000-gallon pool, this model is suited for maintaining existing temperatures rather than heating large volumes from scratch. It is comparable to a small space heater for a room; it keeps the space warm but cannot heat an entire warehouse in a short time.

The MICOE MSHP-005Y1 is rated for a pool volume capacity of 5,000 gallons during the spring to fall seasons. However, for late autumn and winter use, the supported volume capacity drops to 3,000 gallons. This distinction means the unit’s effectiveness is tied to the ambient temperature and the time of year. The 17,000 BTU output allows the unit to heat water 50% faster than standard electric heaters, providing a quicker recovery of heat than basic resistive elements.

The MICOE MSHP-005Y1 features a titanium heat exchanger, a material used to resist corrosion and chemical degradation over time. This material is a common standard in the category, appearing in 15 of the 29 listings we evaluated. The unit also operates at a noise level of 50dB(A), which is a specific measurement of the sound the pump produces during operation. For your setup, ensure your pool is an above-ground model, as the data does not state suitability for inground configurations.

You should choose the MICOE MSHP-005Y1 if you need a compact pool heat pump to maintain a small above-ground pool during the spring and fall months for around $699. This unit is designed for smaller water volumes and provides a specific heating capacity that fits a targeted use case.

The MICOE MSHP-005Y1 offers a 17,000 BTU heating capacity and a titanium heat exchanger, making it a data-driven choice for low-volume maintenance. It currently holds a 3.5 rating from 35 buyer ratings.

Skip it if: You need to heat a pool larger than 3,000 gallons during winter, or if you require a system capable of heating a large inground pool from a cold start.