EU-PLC57100-E Heat Pump Review: Heats Water Up to 105F

EU-PLC57100-E Heat Pump Overview

EU-PLC57100-E Heat Pump heats water at a rate of 22,462 BTU/hr for owners of above ground pools up to 6,500 gallons.

A pool with a 6,500 gallon capacity stays warmer for longer when using a system with a COP of 4.7. This efficiency rating means the unit produces 4.7 units of heat for every 1 unit of electricity consumed, reducing the energy required to reach your target temperature.

The EU-PLC57100-E Heat Pump achieves this efficiency while providing 22,462 BTU/hr of heating power. It is designed specifically to handle the volume of above ground pools without overworking the motor.

We evaluated 29 swimming pool heat pumps and selected 15 for full review based on buyer ratings and brand variety. The EU-PLC57100-E Heat Pump was chosen because it has 61 buyer ratings, the 9th most of the 29 screened. Our full review is based on a data-driven spec breakdown of the pool heat pumps we evaluated. This review is for buyers who prioritize energy efficiency for their pool temperature control.

The Short Answer on the EU-PLC57100-E Heat Pump

Best for: you need to heat an above-ground pool of up to 6,500 gallons and require an efficiency rating of 4.7.

The EU-PLC57100-E Heat Pump is a solid choice for these requirements at a price of around $1,499.

• Pro: The 4.7 COP provides a high efficiency ratio, producing 4.7 units of heat for every 1 unit of electricity consumed.
• Pro: An intelligent control IC manages the heating cycles to maintain the desired temperature.
• Pro: A water flow sensor monitors the movement of water to ensure consistent heat transfer.
• Con: The 22,462 BTU/hr heating capacity limits the rate of heat energy transferred into the water per hour for larger bodies of water.
• Con: A 3.9 rating from 61 buyers indicates a mixed experience among previous owners.

Don’t buy this if: your pool volume exceeds 6,500 gallons, as the unit is not designed to heat larger capacities effectively.

Price assessment: The $1,499 price point is fair for a heat pump providing a 4.7 COP and a 6,500-gallon capacity.

Ensure your electrical setup is compatible by viewing the best swimming pool heat pump for 220v outlets.

Full Technical Specifications for this Swimming Pool Heat Pump

The COP (Coefficient of Performance) of 4.7 measures the efficiency of heat produced relative to electricity consumed.

You might also consider the FibroPool FH270 performance review for high-capacity heating.

Before You Buy: Pool Heat Pump Checklist

The first thing to check is the pool volume capacity to ensure the heater can provide sufficient heat for your specific water volume.

• ☐ Confirm your pool is under 6,500 gallons — a larger volume will result in a heater that runs 24/7 but fails to raise the temperature during cold nights or low solar gain.
• ☐ Check that your local ambient temperature stays above 30F — the unit stops heating when the air drops below this point, which limits use in extreme winter conditions.
• ☐ Verify your plumbing allows for the required flow rate — improper flow or pipe diameter creates excessive pressure drop or insufficient water turnover to allow for heat transfer.
• ☐ Budget for a 22,462 BTU/hr heating capacity — this measures the rate of heat energy transferred into the water per hour, not the total amount of heat stored.
• ☐ Measure your power supply requirements — the unit operates on a standard household voltage, but you must ensure your electrical circuit can support the demand.

You should not buy this pool heat pump if your pool exceeds 6,500 gallons or if you require a heater that functions in sub-30F ambient temperatures.

If a heat pump isn’t right for your setup, explore the alternatives to a swimming pool heat pump.

What These Specifications Let You Do

Heating a maximum pool volume of 6,500 gallons

The EU-PLC57100-E 22,462 BTU Pool Heat Pump supports a maximum pool capacity of 6,500 gallons. This volume capacity defines the total amount of water the unit can effectively heat, allowing you to maintain consistent temperatures in large above ground pools.

Large water volumes require significant thermal output to prevent temperature drops during overnight cycles. Because this capacity is specific to the 22,462 BTU/hr heating rate, you should confirm your pool’s total gallonage before ordering to ensure the unit can keep up with your specific water volume.

How the intelligent control IC manages heat distribution

The EU-PLC57100-E Heat Pump includes an intelligent control IC, which is an integrated circuit that manages the system’s internal operations. This component allows the unit to manage power and heat distribution to maintain the target water temperature.

This control system provides a layer of automation for your pool temperature management. It handles the internal logic of the heat pump so you do not have to manually monitor the device’s operational states to maintain a steady environment.

4.7 COP Efficiency

The EU-PLC57100-E Heat Pump provides a COP (Coefficient of Performance) of 4.7. This efficiency ratio means the unit produces 4.7 units of heat for every 1 unit of electricity consumed by the system.

High efficiency helps lower your electricity costs while maintaining the pool‘s heat. A 4.7 COP allows the unit to provide significant thermal energy while keeping the electrical demand relatively low compared to less efficient heating methods.

The EU-PLC57100-E Heat Pump Against Similar Swimming Pool Heat Pumps

The EU-PLC57100-E Heat Pump provides a 4.7 COP (Coefficient of Performance), which is the ratio of heat produced relative to electricity consumed. This efficiency rating allows the unit to generate 4.7 units of heat for every 1 unit of electricity used.

Comparison with Similar Pool Heat Pumps

The EU-PLC57100-E Heat Pump provides a more balanced price point than the DOEL Swimming Pool Heat Pump while maintaining a high efficiency rating.

• The XKP2207BP 30,000 BTU Electric Pool Heater costs the same as the EU-PLC57100-E Heat Pump at $1499.
• The Raypak Crosswind 40i 33,000BTU Heat Pump is $200 cheaper than this model.
• The ECOPOOLTECH EE100 Ultra Inverter Heat Pump offers a larger 10,000 gallon capacity compared to the 6,500 gallons supported by this unit.
• The 30,000 BTU V7 Plus Pool Heat Pump is $399.01 cheaper than the EU-PLC57100-E Heat Pump.

If you need to heat a pool larger than 6,500 gallons, the ECOPOOLTECH EE100 Ultra Inverter Heat Pump is the better choice for your volume requirements.

If you need a slightly smaller unit, you can view our full MICOE MSHP-005Y1 review.

For much larger bodies of water, see our spec breakdown of the 58000 BTU Heat Pump.

Setting Up This Swimming Pool Heat Pump, and What Support Covers

Electrical and space requirements for initial setup

The EU-PLC57100-E Heat Pump requires a dedicated electrical power source before it can begin heating your water. Because this unit is designed for above ground pools, you must ensure your installation area has the clearance required for a 76-pound unit.

1. Unpack the EU-PLC57100-E Heat Pump and verify all components are present.
2. Connect the PVC piping to the unit’s inlets and outlets to transport water from the pool to the heat pump.
3. Install a flow switch to ensure the unit does not run without water circulation.
4. Connect the power supply to the unit’s electrical input.
5. Turn on the power and set the intelligent control IC to your desired temperature.

Verifying warranty terms and local electrical requirements

Warranty coverage and support terms vary significantly by seller and country. You should confirm the specific terms for your region before the return window closes.

• Confirm the specific electrical requirements for your local grid to avoid damaging the 22,462 BTU/hr heating system.
• Verify the flow switch functionality to prevent the pump from running dry, which can damage the internal components.
• Check that the PVC piping diameter matches the manufacturer’s requirements to maintain the necessary flow rate for heat transfer.
• Ensure the unit is positioned in an area that stays between 30F and 100F to remain within the operating range.

Test the unit for at least one hour on the day it arrives to confirm it reaches the 105F maximum water temperature while a return is still possible.

EU-PLC57100-E Heat Pump Buying Questions Answered

How 22,462 BTU/hr heating capacity impacts water temperature

The EU-PLC57100-E Heat Pump produces 22,462 BTU/hr of heat output. This capacity determines the rate of heat energy transferred into the water per hour, which is the primary factor for how quickly you can raise the temperature of your pool. The unit features a COP (Coefficient of Performance) of 4.7, which is the efficiency ratio of heat produced relative to electricity consumed. Because this figure is at or above the 4.0+ efficiency benchmark, the unit produces 4.7 units of heat for every 1 unit of electricity used.

Compatibility for residential pools up to 6,500 gallons

The EU-PLC57100-E Heat Pump is designed to heat a pool with a capacity of up to 6,500 gallons. This volume capacity measures the total amount of water the unit can effectively heat, meaning it is sized for smaller residential setups. For larger volumes, you would need a unit with a higher BTU rating to avoid a situation where the heater runs continuously without reaching the target temperature. This model includes a water flow sensor to monitor movement and an intelligent control IC to manage the heating cycle.

Pricing and value of this 4.7 COP pool heat pump

The EU-PLC57100-E Heat Pump is priced around $1499 and holds a 3.9 average across 61 buyer ratings. At this price point, the unit offers a high COP of 4.7, which provides a specific efficiency advantage over many entry-level models. While it lacks the high-end branding of manufacturers like Hayward or Jandy, the technical specs provide a clear path to efficient heating for a 6,500-gallon pool.

Frequently asked questions about this swimming pool heat pump

Is the EU-PLC57100-E a good deal compared to more expensive brands?

The EU-PLC57100-E provides a COP of 4.7, which matches the efficiency standards of many premium brands while staying at the $1499 price point. You gain high-efficiency heat production without the brand premium, provided your pool size does not exceed the 6,500-gallon limit.

What is the maximum water temperature for this pool heat pump?

The EU-PLC57100-E Heat Pump reaches a maximum water temperature of 105F. This limit defines the peak temperature the unit can maintain, so you should plan your pool’s target temperature based on this maximum.

Can I use this for a large backyard pool?

No, the EU-PLC57100-E Heat Pump is limited to a 6,500-gallon pool capacity. If your pool is larger than this, the unit will lack the necessary heating power to raise the temperature effectively during cold nights.

What is the ambient temperature range for the EU-PLC57100-E Heat Pump?

The unit operates in an ambient temperature range of 30F to 100F. This means the heat pump can begin warming your water even when the outside air is as cold as 30F.

Is the EU-PLC57100-E Heat Pump Right for You?

Who the EU-PLC57100-E Heat Pump suits and the jobs it is the wrong choice for, listed below with the reason for each.

Where to Buy This Pool Heat Pump

When we looked in November 2026, the EU-PLC57100-E Heat Pump was listed at $1499 – a snapshot that may have changed since.

Swimming pool heat pumps are sold by the retailers below – we do not track which of them has the EU-PLC57100-E Heat Pump in stock, so check availability and the current price with the retailer before making a trip.

• PoolSupply.com (online only) — specialist retailer with extensive technical knowledge
• Les Schwab Pool & Spa (online and physical stores) — specialist retailer with professional installation and service
• Costco (online and physical stores) — bulk purchasing options and membership pricing
• Wayfair (online only) — broad range of residential pool heating products
• Home Depot (online and physical stores) — large selection of major brands and in-store pickup options
• Lowe’s (online and physical stores) — wide variety of residential models and local store support
• Amazon (online only) — massive selection of brands and easy price comparison

Final Verdict on the EU-PLC57100-E Heat Pump

If you need a pool heat pump for a residential above ground pool, the EU-PLC57100-E Heat Pump is a capable choice for around $1,499. You first determine your pool’s volume and compare it to the 6,500-gallon capacity this unit supports. Once the unit is powered, the intelligent control IC—a chip that manages internal settings automatically—regulates the heating process to maintain your desired temperature. The system draws from a 30F to 100F ambient temperature range, allowing it to provide heat even in cooler conditions.

The EU-PLC57100-E Heat Pump provides a heating capacity of 22,462 BTU/hr, which dictates the rate of heat energy transferred into the water each hour. Because it features a COP of 4.7, the unit produces 4.7 units of heat for every 1 unit of electricity consumed. This efficiency rating helps manage your ongoing electricity costs while maintaining the water temperature.

You should choose this model if your above ground pool is under 6,500 gallons and you need a dedicated heating solution that operates efficiently in a wide temperature range. The price point of $1,499 provides a clear entry into the 22,462 BTU/hr heating capacity tier.

The 3.9 rating from 61 buyer ratings provides a significant sample of user feedback for this specific model. This score, combined with the 4.7 COP, establishes the performance profile for the EU-PLC57100-E Heat Pump.

Skip it if: Your pool volume exceeds 6,500 gallons or if you require a heating capacity higher than 22,462 BTU/hr.