Unbranded RR500-S 1HP Dual Cylinder R1234YF/R32 Refrigerant Recovery Machine
Category: Refrigerant Recovery
Check Current PriceThe Unbranded RR500-S 1HP Dual Cylinder unit recovers R1234yf and R32 refrigerants efficiently.
It uses an oil-less 1HP motor and dual cylinders for fast, portable service.
This tool sits in the Refrigerant Recovery category for automotive and HVAC technicians.
Key specifications and compatibility
Unbranded RR500-S 1HP Dual Cylinder R1234YF/R32 Refrigerant Recovery Machine lists core specs and refrigerant support.
The unit runs on 110V-120V AC and draws up to 10 A at full load.
The air-cooled oil-less piston compressor reaches 1750 RPM and stops automatically at 38.5 bar.
Critical technical specifications and safety limits
- Power: 110V-120V, 60Hz
- Motor power: 1 HP; motor speed: 1750 RPM
- Max current draw: 10 A
- High-pressure shutoff: 38.5 bar / 3850 kPa / 558 psi
- Operating temperature: 0-40 C / 32-104 F
- Weight: 18 kg; dimensions: 400 x 250 x 360 mm
- Safety: inlet pressure max 26 bar; tank fill limit 80 capacity
The specifications above ensure the machine works with many modern refrigerants and gauges remain readable.
Recovery methods and refrigerants
Unbranded RR500-S recovers refrigerants in liquid, vapor, or push/pull modes for flexible service.
The device supports R12, R134a, R410A, R1234yf, R32 and dozens of alternative blends for broad compatibility.
Users report emptying a 13 lb R410A charge quickly, and push/pull mode is recommended for >10 kg liquid.
Setup, power, and placement requirements
Unbranded Refrigerant Recovery Machine requires a grounded mains outlet and safe placement during operation.
Place the unit at least 50 cm above floor level and use mechanical ventilation in the workspace.
If you use an extension cord, choose a 3-wire 12 AWG cord shorter than 7.5 m to avoid voltage drop.
Installation steps and accessory checklist
RR500-S Refrigerant Recovery Unit needs a grounded 110V outlet, 3-wire 12 AWG extension cord, and good ventilation.
Follow these setup steps and bring the listed accessories before starting recovery operations.
- Accessories: refrigerant hoses with brass fittings, weighted recovery tank, manifold gauges, scale for tank filling control
- Safety gear: safety goggles, chemical-resistant gloves
- Optional: extra inline filter/drier cartridges and replacement seals
Performance, maintenance, and troubleshooting
RR500-S Refrigerant Recovery Unit balances fast recovery and simple controls with some documented user caveats.
The inline filter/drier and self-purge function reduce contamination and speed up repeated sessions.
Owners note durable housing, accurate gauges, and cost savings versus shop service, but cite a poor manual.
Common faults, repairs, and follow-up questions
the reviewed Unbranded RR500-S refrigerant recovery machine exhibits quick recovery yet sometimes causes user confusion about R32 suitability.
Q: Can I use this unit safely with R32? A: Many buyers report success, but confirm local regulations and verify fittings first.
Q: How do I avoid overfilling the recovery tank? A: Use a scale and stop at 80 tank capacity for safety.