Worthington 285311 (GID-530000) Refrigerant Recovery Tank, 30 lb.
Category: Refrigerant Recovery
Check Current PriceYes the Worthington 285311 (GID-530000) suits many mobile HVAC technicians’ needs.
It packs a 30 lb capacity, 400 PSI rating, Y-valve, and an overfill sensor for safety.
This Refrigerant Recovery tool pairs well with portable recovery machines on service calls.
Worthington 285311 practical offers for mobile HVAC pros
Worthington 285311 (GID-530000) Refrigerant Recovery Tank, 30 lb. delivers field-ready offers like a Y-valve and sensor.
The passive tank accepts vapor and liquid lines to speed onsite reclaim and reduce swap trips.
The 400 PSI pressure rating (pounds per square inch) suits common refrigerants including R410A and many R22 systems.
These engineered details reduce hookup time, lower cross-contamination risk, and improve recovery workflow for solo techs.
Key technical specifications and compatibility details
- Capacity: 30 lb refrigerant
- Pressure rating: 400 PSI working rating
- Valve: Y valve for liquid and vapor recovery
- Includes: tank overfill sensor
- Compatible refrigerants listed: R410A (others not fully enumerated)
- Noted compatibility: practical use with Yellow Jacket 95762 recovery machine
- Price: $109.99 USD
- Power: passive (no electrical power required)
How does the cylinder perform in tight van bays and shelves?
Worthington 285311 fits many van bays but needs two to three inches clearance for valve access.
Measured clearance matters because the Y-valve and overfill sensor need room to connect hoses securely.
For example, high-roof Ford Transit shelves often accept vertical placement for convenient valve reach.
Low-bay cargo vans may require straps and foam blocks to secure this 30 lb cylinder safely while driving.
Portability, van storage, and weight limits for mobile HVAC rigs
Worthington 285311 (GID-530000) remains manageable for single-tech vans at its 30 lb refrigerant capacity.
The spec sheet lacks an empty weight, so plan your payload using conservative full-weight estimates for safety.
Estimate full weight as 30 lb refrigerant plus about 20 lb empty tank for mounting calculations.
Secure the tank with rated straps and place it low in the cargo area to lower the vehicle center of gravity.
Recommended mounting hardware and estimated weights for planning
- Refrigerant capacity: 30 lb
- Assumed empty tank weight: 20 lb (estimate for planning)
- Securement: 2 DOT-rated 1,000 lb straps or E-Track tie-downs
- Vibration padding: closed-cell foam pads or rubber cradle
What fittings and adapters are essential for field repairs?
GID-530000 connects to service equipment but requires correct hoses and couplers stocked in the truck.
Without proper fittings, technicians lose time swapping adapters or improvising under pressure.
Plan hose working pressures and chemical compatibility to match the 400 PSI rating and R410A service use.
Keep standard gauge sets, quick-connects, and flares on hand to handle diverse refrigeration ports and ages.
Essential hoses, adapters, and pressure ratings for field recovery
- Hose working pressure: minimum 400 PSI rated hose and fittings
- Standard manifold fittings: 1/4-inch SAE service ports
- Flare adapters: 5/16-inch, 1/2-inch, and 7/16-inch flare adapters for legacy equipment
- Quick couplers: R410A-rated quick-connects (Yellow Jacket, CPS, Swagelok examples)
- Recommended pairing: Yellow Jacket 95762 recovery machine compatibility noted in specs
Worthington 285311 long-term ROI and maintenance for techs
Worthington 285311 (GID-530000) offers low upfront cost at $109.99, improving short-term ROI for independent techs.
missing warranty terms and DOT certification in the spec sheet create long-term uncertainty for fleets.
Record weight checks, leak tests, and recovery logs to support warranty claims and sustain resale value.
The low price and passive design often improve cash flow but require good documentation for future asset value.
Recommended maintenance, recordkeeping, and inspection intervals
- Inspect visually before each service for dents, valve integrity, and sensor condition
- Weigh tank monthly; record tare (empty) and full weights
- Pressure-check threads and valve seals periodically and run leak tests after each major service
- Keep recovery logs and photographed condition to support warranty or resale
How will regular use affect resale value and warranty claims?
the reviewed Worthington Refrigerant Recovery Tank (285311) loses resale value when valves are damaged or logs are missing.
Because the product listing omits explicit warranty terms, manufacturers may challenge claims without proper documentation.
Maintaining dated recovery logs, weight records, and service photos strengthens warranty positions and resale listings.
Well-documented tanks can recoup a meaningful share of the $109.99 purchase cost when sold used.
Will this tank work with other recovery machines? Yes it generally works, but always verify coupler fit and machine compatibility.
Is the overfill sensor reliable and calibratable? The included sensor reduces overfill risk, but test its operation before critical jobs.
Do I need DOT certification to transport a full tank? Transport rules vary; check local DOT and state regs before moving pressurized tanks.