Robinair 10994 Heater Blanket for 30 lb. and 50 lb. Refrigerant Tanks (Refrigerant Recovery)
Category: Refrigerant Recovery
Check Current PriceYes the blanket speeds charging of 30 lb and 50 lb refrigerant cylinders, saving field time. The heater reaches about 125 F and plugs into standard AC power for quick tank warming. It fits neatly into truck Refrigerant Recovery kits to reduce cylinder swaps and charge delays.
Robinair 10994 performance and suitability for truck-based HVAC
Robinair 10994 Heater Blanket for 30 lb. and 50 lb. Refrigerant Tanks (Refrigerant Recovery) improves charging speed on trucks by increasing cylinder pressure and reducing soak time. The unit s 125 F thermostat works well with 410A and common refrigerant cylinders in service trucks. Technicians report measurable time savings compared with hot-water immersion or swapping chilled cylinders during roadside jobs.
How suitable is the unit s portability for crowded truck beds?
Robinair 10994 increases cylinder pressure for faster charging. The 30 lb and 50 lb compatibility and long velcro strap secure the blanket on crowded beds. You must wrap the blanket fully before powering to avoid thermal cut-off or damage. Store it flat under a toolbox and route the cord to an inverter or truck AC outlet.
Mobile refrigeration unit features and power needs for service trucks
Robinair 10994 Heater Blanket for 30 lb. and 50 lb. Refrigerant Tanks (Refrigerant Recovery) draws 300 W. Its 2.6 A rating fits most truck AC outlets or inverters when sized correctly. The corded AC connection needs an outlet or inverter (converts battery DC to AC) on the truck.
Technical specifications and ratings
- Thermostat set point: 125 F / 55 C
- Power rating: 300 W
- Current rating: 2.6 A
Compressors need separate power; the blanket does not drive compressors directly. Use a true sine-wave inverter rated at least 600 W continuous for safe operation from truck batteries. Plug into a GFCI (ground-fault circuit interrupter) outlet when using shore power for added safety.
What electrical and compressor power constraints matter on trucks?
Robinair Refrigerant Recovery Heater Blanket draws 300 W, requiring a suitable inverter or shore power. Compressor start current (extra surge when motor starts) remains separate from the blanket s draw. Plan inverter capacity and battery bank accordingly for multi-hour jobs to avoid voltage sag.
Robinair 10994 cost, maintenance and ROI for truck HVAC fleets
Robinair 10994 Heater Blanket for 30 lb. and 50 lb. Refrigerant Tanks (Refrigerant Recovery) costs about $194.54 USD. Users report fast heating and time savings but some units fail early due to cord or element issues. Company replacements occurred in reports, though formal warranty details remain unavailable publicly. ROI depends on service volume, but modest labor savings often justify a single-unit purchase.
Can on-road vibration and extreme heat affect service unit longevity?
10994 Refrigerant Recovery Heater Blanket exhibits reported cord and element failures under heavy truck vibration. The built-in thermal cut-off protects against overheating when used correctly. Secure the blanket on the tank, stow it away from sharp edges, and inspect the cord routinely. For fleets, rotate units and stock spare cords to minimize downtime from early failures.
Will the blanket work with propane-powered rigs? No, the blanket requires AC power and an electrical source. How many charges per day justify multiple units? Twenty ten-minute saves recoup one blanket’s cost. Should fleets prefer this over hot-water immersion? For field work without water, the blanket offers consistent, safer heating.