Gdrasuya Gdrasuya10 Two-Cylinder AC Refrigerant Recovery Machine with Filter Hose (110V, 1HP)
Category: Refrigerant Recovery
Check Current PriceYes the Gdrasuya Gdrasuya10 excels for mobile HVAC technicians with its two-cylinder design.
It offers gas, liquid, and push-pull modes plus a 1HP 110V motor.
This unit fits the Refrigerant Recovery category for on-vehicle service.
Gdrasuya Gdrasuya10 Mobile Recovery Unit includes
Gdrasuya Gdrasuya10 Two-Cylinder AC Refrigerant Recovery Machine with Filter Hose (110V, 1HP) suits vehicle service.
It uses gas, liquid, and push-pull modes and oil-free compression.
The unit includes a filter hose and overload plus high-voltage protection.
- Power: 110V AC (plug-in)
- Motor: 1HP (electric)
- Operating modes: gas recovery, liquid recovery, push-pull
- Recovery rates: gas 0.5 kg/min; liquid 3.6 kg/min; push-pull 10 kg/min
- Compression: oil-free
- Dimensions: 15.75 x 9.84 x 14.17 in
- Included: filter hose
- Price: USD 289.99
These includes improve on-truck Refrigerant Recovery speed and reduce contamination risks.
How do I perform routine maintenance and filter changes?
Gdrasuya Gdrasuya10 provides easy filter access for fast field replacements.
Filter hose means the inline screen that captures oil and debris.
Change it after every 10 to 20 recoveries or when flow drops, and inspect ports monthly.
Good maintenance prevents pump failure and reduces truck time.
Portability and Power: Assessing On-vehicle Refrigerant Recovery
Gdrasuya Gdrasuya10 Two-Cylinder AC Refrigerant Recovery Machine with Filter Hose (110V, 1HP) offers compact dimensions for truck storage.
The small footprint (15.75×9.84×14.17 in) and handle aid mounting but the weight is unspecified.
110V AC motor (standard mains) means you need an inverter or shore power for on-vehicle operation.
- Physical size: 15.75 x 9.84 x 14.17 in fits many tool compartments
- Handle: included for carrying
- Missing data: weight, noise level, and current draw are not listed
Push-pull mode increases recovery speed but demands higher current than gas mode.
What are best vehicle mounting and power hook-up methods?
Gdrasuya Refrigerant Recovery Machine requires steady 110V AC to reach rated 1HP performance.
Install on vibration-isolating rubber mounts and secure with straps to prevent shifting during transit.
Use a 1500-3000W inverter with 3000W surge capacity when you run off a truck battery.
Hardwire to a dedicated 15-20A circuit if shore power is available for safest operation.
Why Professional Mobile Techs Prefer Gdrasuya Gdrasuya10 Recovery
Gdrasuya Gdrasuya10 Two-Cylinder AC Refrigerant Recovery Machine with Filter Hose (110V, 1HP) fits many mobile pros’ workflows.
High push-pull throughput (10 kg/min) speeds large-system recoveries and reduces on-site time.
Oil-free compression lowers contamination risk and makes the machine easier to service between jobs.
At USD 289.99, the unit delivers strong value for truck-mounted refrigerant recycling.
Can I use reclaimed refrigerant from a truck for warranty calls?
Gdrasuya10 Refrigerant Recovery Machine (Two-Cylinder) accepts reclaimed refrigerant but only if purity meets OEM standards.
Use inline oil and moisture tests before charging; contamination voids many compressor warranties.
If manufacturers require new refrigerant, document test results and follow their warranty procedures.
When in doubt, use new factory refrigerant for warranty calls.
Estimated Recovery Time and Inverter Requirements
How long does a full recovery take for typical vehicles?
At rated speeds, liquid mode pulls 3.6 kg/min and push-pull 10 kg/min.
A 1 kg system could clear in under a minute, but hoses and refrigerant state affect time.
What inverter size do I need for truck power?
Use a 1500-3000W inverter with 3000W surge for reliable starts.
Brands like Victron or Go Power offer suitable models with pure-sine output.
Refrigerant Compatibility and Warranty Guidance
Which refrigerants does the unit support?
The listing lacks a compatibility list, so confirm R134a or R410A suitability with the seller.
Many two-cylinder recovery systems handle common HFCs, but always verify for high-pressure blends.