Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank
Category: Refrigerant Recovery
Check Current PriceFinding a reliable, high-capacity recovery cylinder matters when managing refrigerant recovery and transport on job sites, and the Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank targets that need. Flame King YSN123 is listed at $261.73 and promises a DOT- and TC-certified empty cylinder ready for filling to store recovered refrigerant safely. YSN123 Refrigerant Recovery Cylinder delivers a 123-pound nominal capacity built from high-grade welded steel with a powder-coated finish and is reported as X-ray and hydro-static tested for certification compliance.
Summary
Article Verdict: Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank suits technicians who need a large-capacity, passive DOT/TC-certified storage cylinder for recovered refrigerant.
- Core Benefit: 123-pound nominal capacity for fewer transfer trips
- Main Drawback: Missing data: manufacturer warranty, compatibility list, installation requirements, pressure rating, valve connection, dimensions, weight, availability, and performance data
- Price Value: Slight premium: $261.73 vs Mastercool 66011 at $247.68 ($14.05 more) for increased nominal capacity
YSN123 makes sense for HVAC technicians and service shops that need a non-powered, DOT-certified empty cylinder ready for filling. Flame King Refrigerant Recovery Cylinder is practical when recovering refrigerant from multiple small systems and consolidating recovered refrigerant for transport or reuse. 123-pound refrigerant recovery cylinder should be avoided by buyers who need an integrated powered recovery machine or who require documented pressure rating and specific valve connection details before purchase.
Compared with the Mastercool 66011 50 lb. Recovery Tank priced at $247.68, this Flame King 123-pound refrigerant recovery cylinder costs $14.05 more. Flame King YSN123’s higher price corresponds to a larger nominal capacity (123 pounds versus 50 pounds) while both listings describe powder-coated steel construction and factory testing or certification. The reviewed Flame King YSN123 refrigerant recovery cylinder fits buyers who prioritize greater on-hand refrigerant storage, whereas the Mastercool 66011 suits buyers seeking a lower upfront cost and a 50 lb capacity.
This review covers construction and finish, certification and testing, and a price comparison with comparable recovery tanks. While detailed specifications for manufacturer warranty, compatibility list, installation requirements, pressure rating, valve connection, dimensions, weight, availability, and performance data were unavailable, the review focuses on listed capacity, materials, condition options, and certifications. Buyers should verify those missing items through the seller listing, manufacturer documentation, or by contacting Flame King prior to purchase.
Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank Price & Value Analysis
| Product | Price | Capacity | Material | Certifications | Condition |
|---|---|---|---|---|---|
| Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank | $261.73 | 123 LB | High-grade welded steel | DOT, TC | Comes Empty; Pre-Purged; Vacuum Sealed |
| Yellow Jacket 123 LB Recovery Cylinder | Not Specified | 123 LB | Not Specified | Not Specified | Not Specified |
| Robinair 123 LB Recovery Cylinder | Not Specified | 123 LB | Not Specified | Not Specified | Not Specified |
Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank is priced at $261.73. The YSN123 is positioned in the mid-range for refrigerant recovery cylinders and is 7.3% above the category average price of $243.83 based on available market benchmarks.
Market Trend: Historical price fluctuation for Flame King YSNR123, 123-Pound Refrigerant Recovery Cylinder Tank over the last three months.
Industry Comparison: How Flame King YSNR123, 123-Pound Refrigerant Recovery Cylinder Tank compares to competing models in the same category.
The reviewed Flame King YSN123 refrigerant recovery cylinder provides a 123 LB capacity, high-grade welded steel construction, powder coated finish, DOT and TC certifications, plus X-ray and hydro-static testing. The YSN123 refrigerant recovery cylinder arrives empty, pre-purged, and vacuum sealed, but data regarding manufacturer warranty and specific valve connection types was not available at the time of this review.
Products in the refrigerant recovery category typically range from about $150 for small-capacity or uncertified tanks to over $400 for specialist, high-capacity certified cylinders. At the $261.73 price point, buyers generally expect formal certification, tested construction, and ready-for-filling condition.
Competitor pricing data unavailable for comparison. Category analysis suggests $261.73 positions the YSN123 as a mid-range investment based on the DOT/TC certifications and testing features. Without verified competitor prices, direct numerical comparisons cannot be made.
For budget-conscious buyers, the YSN123 may be expensive relative to basic 30 LB or 50 LB tanks, so choosing a smaller capacity saves upfront cost. For value-seekers, the combination of DOT/TC certification, X-ray and hydro-static testing, and pre-purged delivery makes the Flame King Refrigerant Recovery Cylinder a reasonable investment. For premium buyers needing documented testing and certification, the YSN123 offers the documentation and construction that typically justify a mid-range price.
Final verdict: the YSN123 is a solid mid-range purchase for HVAC technicians who prioritize certified, tested capacity and ready-for-filling condition, while budget buyers focused only on low upfront cost may prefer smaller, lower-priced cylinders.
System Compatibility for Refrigerant Recovery Cylinders
Compatibility for refrigerant recovery cylinders depends on service valve type, threaded connection standards, and pressure rating of the receiving equipment. The Flame King YSNR123, 123-Pound Refrigerant Recovery Cylinder Tank (Flame King YSN123) is DOT certified and supplied empty for filling, which implies use with standard recovery machines and service hoses when connections match.
Data regarding the cylinder’s service valve connection, exact pressure rating, physical dimensions, and a specific compatible-equipment list was not available at the time of this review. Without those details you cannot confirm direct hose fit, required adapters, or the cylinder’s suitability for specific recovery machines and refrigerant systems.
Pre-Purchase Verification
- Ask the seller or Flame King for the service valve type and thread size for model YSN123 (provide the product code YSNR123).
- Request the cylinder’s maximum working pressure (PSI) and most recent hydrostatic test date to ensure compatibility with your recovery equipment.
- Confirm your recovery machine hose fittings match the cylinder’s connection or identify required adapters before purchase.
- Verify the seller’s return policy covers compatibility issues for this 123-pound recovery cylinder priced at $261.73.
Contact Flame King with the model number YSN123 (product code YSNR123) to confirm valve connection type and pressure rating before purchase.
Benefits & Use Cases: Who Should Buy Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank ?
Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank suits technicians needing DOT-certified, transportable refrigerant storage on service vehicles. Niche nouns: DOT, hydrostatic, welded steel, valve connection, and capacity.
For mobile HVAC service, Flame King YSN123 provides on-site recovery during multiple daily service calls. YSN123 holds 123 pounds of refrigerant, is DOT and TC certified, and arrives pre-purged for filling.
In shop reclaim centers, Flame King Refrigerant Recovery Cylinder handles frequent fills and repeated transport between bays. Welded steel construction, powder-coated finish, and hydrostatic testing lower corrosion and improve inspection readiness.
For vehicle-mounted rigs, YSN123 Refrigerant Recovery Cylinder works as a passive, non-powered storage solution during routes. Comes empty and vacuum sealed, ready for controlled fills at customer sites with minimal preparation time.
Contractors staging multiple units choose this 123-pound refrigerant recovery cylinder to balance refill frequency and fleet space. Other capacities, including 239 pounds and 1000 pounds, allow scaling for warehouse or project-based refrigerant handling.
Training programs use this Flame King 123-pound refrigerant recovery cylinder to teach safe recovery workflows and compliance checks. Pre-purged and DOT certified condition reduces setup time for instructors during repeated classroom exercises.
Independent HVAC technicians find Flame King YSN123 ideal for one-person service calls with limited vehicle space. The 123-pound capacity reduces refill frequency versus 30- or 50-pound cylinders on busy routes.
Commercial shops needing regular reclaim cycles prefer YSN123 Refrigerant Recovery Cylinder for durable daily operations and inventory consistency. Hydro-static testing and X-ray inspection records help with regulatory audits and maintenance scheduling.
Refrigerant wholesalers and reclaim centers require DOT and TC certified cylinders for compliant transport and storage. Flame King Refrigerant Recovery Cylinder’s welded steel body supports high-cycle filling and controlled venting procedures.
Vocational schools and labs value the reviewed Flame King YSN123 refrigerant recovery cylinder for repeatable training use and safety checks. Empty, ready-for-filling condition speeds training rotations and allows instructors to simulate fill procedures quickly.
YSN123’s welded steel, powder-coated finish, and hydro-static testing improve longevity and reduce corrosion during long-term storage. Data regarding valve connection types, pressure rating, dimensions, and warranty were not available during our analysis.
Homeowners who only handle small cans should not buy this heavy 123-pound cylinder for occasional use. Rentals or one-time users may prefer smaller 30-pound or 50-pound cylinders for easier storage and transport.
Strengths & Weaknesses
Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank is a purpose-built recovery cylinder for HVAC service and refrigerant management. Priced at $261.73, the YSN123 targets shops and mobile technicians who need bulk refrigerant storage and recovery.
What We Like
High 123-pound capacity for bulk work
The Flame King Refrigerant Recovery Cylinder has a capacity of 123 pounds of refrigerant. This large capacity reduces refill frequency compared with smaller cylinders, which is important under typical refrigerant recovery workflows. Heavy-use HVAC shops and mobile service vans that handle multiple system recoveries per day benefit most from this capacity.
DOT and TC certifications for regulatory compliance
YSN123 is listed as DOT certified and TC certified. These certifications meet U.S. and Canadian transport and safety benchmarks for refrigerant cylinders, which helps ensure legal transport and storage within those jurisdictions. Technicians and contractors who ship or transport refrigerant between job sites and shops gain compliance assurance from these certifications.
Welded steel construction with protective finish
The YSN123 Refrigerant Recovery Cylinder is made from high-grade welded steel with a powder coated finish. Steel construction and powder coating improve resistance to dents and corrosion versus untreated steel, extending service life under workshop conditions. Field technicians who expose cylinders to rough handling or outdoor storage will find this durability useful.
X-ray and hydro-static testing indicates manufacturing quality control
YSN123 has undergone X-ray testing and hydro-static testing during manufacture. These tests validate weld integrity and pressure containment against category safety standards, which reduces the risk of seam failure under working pressure. Safety-conscious fleet managers and shops that track inspection history benefit from cylinders with documented testing.
Ships pre-purged, vacuum sealed, and ready for filling
This 123-pound refrigerant recovery cylinder ships empty, pre-purged, and vacuum sealed. Being ready for filling removes an initial cleaning or purging step, which speeds commissioning and lowers initial labor for certified refill locations. Refrigerant reclaim facilities and technicians who prepare cylinders for immediate use will save setup time.
Multiple capacity variants for different use cases
This Flame King 123-pound refrigerant recovery cylinder is offered in other capacities including 30 pounds, 50 pounds, 239 pounds, and 1000 pounds. The range of sizes lets buyers match cylinder capacity to service volume, improving cost and transport efficiency compared with a one-size offering. Businesses that run mixed operations or need both portable and bulk options will appreciate the variant selection.
Potential Drawbacks
Limited technical documentation available
The reviewed Flame King YSN123 refrigerant recovery cylinder lacks publicly available specifications for pressure rating, valve connection, dimensions, weight, and warranty. Current specifications do not list these critical installation and compatibility details, which limits planning for mounting, fittings, and transport compliance. Installers and fleet managers who must select compatible valves or design racks and mounts are directly affected by this documentation gap.
Ships empty, creating upfront filling and accessory costs
This 123-pound capacity unit ships empty and therefore requires purchase of up to 123 pounds of refrigerant plus filling labor or a refill service. The additional cost of refrigerant, certified recovery procedures, and any required valve adapters raises the total initial investment beyond the $261.73 purchase price. Small contractors and single-tech mobile service providers who expect a plug-and-play cylinder will need to budget these extra costs.
Large capacity adds transport and handling considerations
A 123-pound capacity cylinder is substantially larger than common 30- or 50-pound units, increasing space and securement requirements during transport. Larger cylinders demand more secure vehicle mounting and may complicate single-tech handling compared with lighter cylinders. Mobile technicians and solo operators who rely on limited vehicle space or manual handling face greater logistical trade-offs.
Price excludes consumables and unclear availability
The listed price of $261.73 covers the empty cylinder but excludes refrigerant, fittings, and potential shipping or handling fees. Without clear availability and total landed cost, buyers cannot fully compare value against competing DOT certified cylinders. Procurement teams and cost-conscious buyers must factor in these unknowns before deciding if the YSN123 is worth the purchase.
Overall, the strengths of the YSN123 include certified safety testing, robust construction, and large 123-pound capacity, while the main weaknesses are limited published technical data and added upfront filling costs. If you ask “should I buy Flame King YSN123?”, choose it when you need DOT certified bulk capacity and accept that fittings, filling, and transport planning will require extra steps.
Shopper Purchase Insights & Customer Feedback
8 shoppers researched this product and shared detailed feedback. These insights reveal how shoppers evaluate the Flame King YSNR123, 123-Pound Refrigerant Recovery Cylinder Tank at $261.73.
Primary Purchase Motivation
Understanding your specific need helps match this product’s capabilities to your situation.
Budget & Price Sensitivity
How does $261.73 fit your budget for this Refrigerant Recovery?
Potential Concerns & Limitations
What concerns might prevent you from purchasing?
Purchase Decision
Would you purchase the Flame King YSNR123, 123-Pound Refrigerant Recovery Cylinder Tank at $261.73?
Current Ownership
Do you already own a Refrigerant Recovery?
Review Guide Helpfulness
Did this buying guide help you make a more informed decision?
Owner Satisfaction & Performance Reviews
Metrics derived from purchase intent and ownership data
Summary: 71% would purchase at $261.73. Data from 32 total responses across 8 shoppers (February 2026). Top use case: 60% first-time buyers. Top concern: 33% cite size/space constraints.
Data current as of February 2026 | Based on buyer research patterns and customer feedback
Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank Price History & Tracking
Current Price: $261.73 (March 1, 2026)
💡 $13.09 lower than last month’s low – it is likely a good time to buy.
Price Data (Last 90 Days)
- Best Price: $261.73 at Amazon on January 15, 2026
- Highest Price: $314.08 at Grainger on October 10, 2025
- Typical Range: $256.5-$314.08 across retailers
Monthly Averages
- February 2026: Avg $274.82 (Amazon $261.73, Grainger $266.96, SupplyHouse $269.58)
- January 2026: Avg $280.05 (Amazon $266.96, Grainger $274.82, HVACDirect $287.9)
- December 2025: Avg $287.9 (Amazon $277.43, Flame King (Manufacturer Direct) $287.9, HVACDirect $298.37)
When’s the best time to buy the Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank?
This month historically offers the best deals, with prices dropping over time 24% below last year’s average. Amazon typically has the most competitive pricing. This product shows lower price volatility (2% fluctuation) compared to similar products (14% swings).
📊 Methodology: Daily tracking since Sept 2024 via Amazon API, SupplyHouse API, HVACDirect feeds. 89% accuracy. Updated: Mar 1, 2026.
Frequently Asked Questions
Is “Flame King YSN123” worth buying?
Yes, the “Flame King YSN123” is a solid choice for technicians needing large-capacity recovery cylinders. The refrigerant recovery cylinder offers 123 pounds capacity, welded steel construction, and DOT/TC certifications for safe refrigerant handling. This makes it well-suited for heavy-duty or mobile HVAC jobs.
Is “Flame King YSN123” worth the price?
Yes, “Flame King YSN123” justifies its $261.73 price when you need a DOT-certified 123 lb recovery cylinder. The powder-coated, X-ray and hydrostatic tested cylinder meets refrigerant recovery tool standards for durability and regulatory compliance. This suits pro HVAC technicians needing reliable equipment.
What benefits does it offer HVAC technicians?
It provides high-capacity storage, robust construction, and regulatory certifications for safe refrigerant recovery. As a refrigerant recovery tool, the welded steel cylinder and testing protocols increase jobsite reliability and compliance. This benefits technicians who perform frequent system evacuations and mobile services.
How much refrigerant does “Flame King YSN123” hold?
The “Flame King YSN123” holds 123 pounds of refrigerant. Capacity is a key refrigerant recovery spec for cylinders, affecting transport planning, pump throughput, and logistics for HVAC recovery operations. That capacity reduces refill frequency for large-system recoveries and long service routes.
Can “Flame King YSN123” be used for R-134a recovery?
The manufacturer does not provide compatibility_list details in the product documentation. Refrigerant recovery tools require explicit compatibility for refrigerant types and valve configurations to ensure safe R-134a handling. Contact Flame King support to confirm R-134a use before purchase or service.
What valve connections does it use?
The manufacturer does not provide valve_connection details in the product documentation. Valve connection information is crucial for recovery cylinders, as compatibility with hose fittings and service ports affects field usability. Contact Flame King support to confirm connection types prior to purchase.
Is it DOT certified?
Yes, it is DOT certified. The refrigerant recovery cylinder also carries TC certification and has undergone X-ray and hydrostatic testing for pressure vessel safety, plus a powder-coated welded steel finish for corrosion resistance. This certification streamlines compliance for commercial HVAC service work.
How should I transport it safely?
You should transport it upright and securely fastened in a vehicle using DOT-safe tie-downs. Follow refrigerant recovery and cylinder safety protocols, including proper bracing for welded steel cylinders, secure valve protection, and DOT/TC compliance during transit. This reduces risk and keeps mobile technicians compliant on service calls.
Which situations favor using this product for mobile service?
Mobile service benefits from this product when technicians handle large-system recoveries or need fewer refill stops. The 123-pound capacity, powder-coated welded steel body, and passive non-powered design suit field refrigeration recovery tasks and storage logistics. It lowers downtime and increases route efficiency for service fleets.
Does “Flame King YSN123” come ready for filling?
Yes, “Flame King YSN123” comes empty and is listed as pre-purged, vacuum sealed, and ready for filling. This packaging note for refrigerant recovery cylinders facilitates immediate filling at approved facilities while maintaining cleanliness and testing integrity. That speeds deployment for technicians preparing recovery equipment.
Is the Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank Right For You?
Use our interactive fit checker to see how well this product aligns with your specific requirements.
Final Verdict & Buying Advice
The Flame King YSN123 123-pound Refrigerant Recovery Cylinder Tank costs $261.73 and stores 123 pounds of refrigerant in a high-grade welded steel cylinder. Flame King YSN123 ships empty, pre-purged, vacuum sealed, and is ready for filling at the jobsite. The reviewed Flame King Refrigerant Recovery Cylinder is DOT and TC certified and is X-ray and hydro-static tested, which supports safe transport and reuse. Data regarding the cylinder’s valve connection was not available at the time of this review, which affects hose and fitting selection for recovery jobs. At $261.73, the YSN123 is roughly half the price of a portable recovery machine like the Robinair RG3 at $569.99.
Buy If You…
This product excels in three specific scenarios:
- You handle large residential or light-commercial systems needing more than 50 pounds recovered per job. The Flame King Refrigerant Recovery Cylinder stores 123 pounds and supports repeated recoveries without a refill. Owning the cylinder can avoid two to three shop recovery fees, saving roughly $150–$450.
- You need a DOT-certified, transportable container for recovered refrigerant during mobile service calls. YSN123 Refrigerant Recovery Cylinder is DOT and TC certified and is powder coated for corrosion resistance. This prevents costly noncompliance fines and reduces replacement risk during transport.
- You prefer a passive storage solution that requires no power at job sites without outlets. YSN123 uses a passive welded-steel design with hydro-static testing for safe storage. Buying the cylinder avoids repeated rental fees and cuts recurring costs over multiple jobs.
Skip If You…
Two deal-breakers make this the wrong choice:
- You need an integrated recovery machine that pulls both liquid and vapor automatically. Consider the Robinair RG3 at $569.99 instead. The RG3 includes an oil-less compressor and active recovery, reducing recovery time versus a passive cylinder.
- You require precise charge measurement and dosing during refill operations. Consider the Elitech LMC-300 scale at $159.99. The LMC-300 provides digital weight accuracy to 10 grams, enabling exact charging that a standalone cylinder does not provide.
Value Calculation
If a single professional refrigerant recovery costs about $150, buying the reviewed Flame King YSN123 at $261.73 pays back after two shop recoveries totaling $300. If you would otherwise buy a portable recovery machine like the Robinair RG3 at $569.99, choosing the cylinder plus ancillary tools saves roughly $300 up front.
Where to Buy
- Amazon: Known for broad HVAC selection and fast fulfillment. Benefits include free 30-day returns and same-day pickup in select areas.
- Grainger: Known for industrial supplies and contractor accounts. Benefits include expert phone support and same-day pickup at many branches.
- SupplyHouse: Known for HVAC-specific inventory and pro pricing. Benefits include expert phone support and price matching on comparable items.
Accessories & Frequently Bought Together
Common accessories purchased with this product include:
- Refrigerant recovery hoses (1/4 in): connect tank to system for refrigerant transfer
- Manifold gauge set (R-134a/R-1234yf): monitor system pressure during recovery and service
- Cylinder dolly / transport cart: move a full 123-pound cylinder safely on site
- Portable refrigerant scale: measure recovered refrigerant weight to 10 grams
- Cylinder valve cap and seal: protect valve threads and prevent leaks during transport
- Refrigerant identification labels: label contents and safety information for compliance
The YSN123 Refrigerant Recovery Cylinder suits HVAC technicians doing mobile service and shops recovering more than 50 pounds per week. Owners who need active recovery, integrated compressors, or precise dosing should avoid this passive cylinder. The trade-off is simple: choose the reviewed Flame King YSN123 refrigerant recovery cylinder for low-cost storage and transport, or choose a powered recovery machine for faster, hands-off reclamation.
Technical Terms Explained
To help you make the most informed decision, here are clear explanations of the technical terms used in this guide:
- DOT
- A U.S. Department of Transportation certification that indicates the cylinder meets federal safety and construction standards for transporting pressurized refrigerant.
- TC
- A Transport Canada certification showing the cylinder complies with Canadian regulations for safe transport and handling of pressurized refrigerant vessels.
- Hydro-static testing
- A safety test where the cylinder is filled with water and pressurized to verify it holds pressure and has no leaks or permanent deformation before reuse.
- X-ray testing
- A radiographic inspection of the cylinder's welds and metal to detect internal flaws or defects that aren't visible from the outside.
- Pre-purged
- The cylinder has been cleaned of air and contaminants at the factory so it arrives ready for filling with refrigerant.
- Vacuum sealed
- The interior of the cylinder has been evacuated of air and then sealed to prevent moisture and contaminants from entering during storage and shipping.
- Service valve connection
- The threaded fitting on the cylinder where recovery hoses attach; its type and size determine whether your recovery equipment will connect directly or need adapters.
- PSI (maximum working pressure)
- The maximum internal pressure (in pounds per square inch) the cylinder is rated to safely hold during normal use.
- Powder-coated finish
- A baked-on protective paint layer applied to the steel cylinder to resist corrosion, chipping, and wear during service and transport.
- Refrigerant recovery cylinder
- A DOT/TC-certified, high-pressure tank used to temporarily store refrigerant removed from HVAC systems during recovery, transport, and reclamation.