Can the Hurricane Inline Fan exhaust radon from a basement?

You should measure your basement’s square footage and determine your local required air exchange rate before ordering. Once you have your measurement, verify that your duct run is short enough to maintain this flow rate.

Sunlight Supply Hurricane Inline Fan specifications and radon mitigation capabilities

In our comparison of the centrifugal fan options we evaluated, the Sunlight Supply Inc. HGC736570 Hurricane Inline Centrifugal Fan provided a 171 CFM rating and a 4-inch inlet/outlet diameter. For radon mitigation, the specific CFM (cubic feet per minute) is vital because radon systems require specific air exchange rates that generic ventilation might not meet. This unit features a steel construction with a powder-coated finish to resist the corrosive nature of high-humidity basement air. It operates on a 115V circuit and includes an 8 ft power cord. While the fan provides 171 CFM, it does not reach the 300 to 600 CFM needed for whole-home ventilation or the 400 to 800 CFM required for a laboratory fume hood. It is, however, sufficient to move air in a tight crawlspace, which typically requires 50 to 150 CFM.

You can find the technical specifications in our Hurricane Inline Fan spec breakdown.

What to Check Before Buying the Hurricane Inline Fan

Before purchasing this centrifugal blower—a fan that uses an internal impeller to pull air through a duct system—verify these technical requirements for your specific installation:

For a side-by-side evaluation, see how the Hurricane Inline Fan compares.

• Confirm your basement has a 115V electrical outlet that can support the motor’s power draw.
• Measure your ducting to ensure the 4-inch port size matches your existing pipework.
• Verify the static pressure (the resistance the fan must overcome to move air) of your duct run and vent cap to ensure the motor won’t overheat.
• Check if your local building codes require a specific backdraft damper (a flap that prevents air from flowing backward into the home) when the fan is off.

Comparing the Hurricane Inline Fan to Other Options

The Hurricane Inline Fan is a compact 8.98-pound unit designed for targeted ventilation. You should look at other options if your project requires high-volume airflow, such as whole-home systems or industrial fume extraction, as those tasks require much higher CFM ratings than 171. For smaller, localized tasks like crawlspace ventilation or single-room radon extraction, this model provides a balance of capacity and size.

Researching other options? View the best centrifugal fan for radon mitigation.

If you need to move a moderate volume of air for a basement radon setup, the Hurricane Inline Fan is a suitable choice. However, if your requirements exceed 171 CFM, you should consider a higher-capacity industrial blower.

Quiet operation is essential, so consider the best centrifugal blower for low noise exhaust.

Reviewed by the Refrigerant Recovery Pro editorial team. Refrigerant Recovery Pro writes these guides from the 200 most-reviewed centrifugal blower listings in our retail dataset, not from manufacturer copy.