Refrigerant Recovery Pro is reader-supported: some links on this page are affiliate links, and as an Amazon Associate Refrigerant Recovery Pro earns from qualifying purchases at no extra cost to you. Learn more.
iLIVING 18" Wall Mounted Shutter Exhaust Fan
The iLIVING Shutter Exhaust Fan regulates temperatures between 32-130 F, so it suits you if you need automated climate control.
1736 CFM airflow capacity
- Airflow Capacity
- 1736 CFM – at or above the 1,000 CFM reference figure
- Fan Diameter
- 18″
4.7/5 from 1,338 buyers
- Average buyer rating
- 4.7 out of 5
- Ratings behind it
- 1,338
- What that supports
- A large enough sample to read as a real buyer signal
- Where it comes from
- The product listing, read 11 November 2026
2 deciding specs not stated
- Noise Level
- Not stated in the listing – confirm with the seller before ordering
- Static Pressure Capacity
- Not stated in the listing – confirm with the seller before ordering
Suits garage workshop owners
- Garage workshop owners
- Homeowners in humid climates
- Workshop hobbyists
- Small greenhouse operators
iLIVING Shutter Exhaust Fan Overview
iLIVING 18 Inch Wall Mounted Shutter Exhaust Fan moves 1736 CFM of air, making it suitable for those needing to ventilate a large attic space.
A clear, well-ventilated attic stays dry and habitable when the airflow capacity meets the requirements of the space. The iLIVING Shutter Exhaust Fan achieves this with a 1736 CFM rating, which exceeds the 1,000 CFM threshold where residential fans transition to high-volume industrial requirements.
This unit features a fully enclosed, thermally protected motor and corrosion-resistant construction for long-term use. You can adjust the output using the 3-speed settings or the integrated thermostat.
We evaluated 114 axial blowers and selected 15 for a full review based on buyer ratings and screening criteria. This model was chosen because it has 1,338 buyer ratings, the 11th most of the 114 screened. Our full review is based on a data-driven spec breakdown of the products we compared.
How Refrigerant Recovery Pro picked: we started from the 200 most-reviewed axial blower listings in our retail dataset, removed duplicates, accessories and off-category products, and 114 qualified. This product is one of 15 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
The Short Answer on the iLIVING Shutter Exhaust Fan
Best for: you need to move high volumes of air to ventilate a large attic or crawlspace.
The iLIVING Shutter Exhaust Fan is a strong option at around $164.99.
- Pro: The 1736 CFM airflow capacity provides sufficient volume for large-scale ventilation.
- Pro: A built-in thermostat allows the fan to activate automatically between 32°F and 130°F.
- Pro: The 18″ fan diameter allows for a broad intake area to move air efficiently.
- Con: The 6 ft power cord limits the distance from the wall outlet to the mounting location.
- Con: The plug-in installation requires a nearby 3-prong outlet, which may necessitate extension cords in remote attic spaces.
Don’t buy this if: your installation requires a fan with a specialized high-static pressure rating for extremely long duct runs or dense filtration.
Price assessment: The $164.99 price is fair for a fan that includes both a thermostat and an automatic shutter.
Refrigerant Recovery Pro score: 8/10 (data-driven – see “How we picked” above)
If you are working on a subterranean space, see the best crawlspace basement ventilator fan options available.
Full Technical Specifications for this Axial Blower
| Airflow Capacity | 1736 CFM |
| Fan Diameter | 18″ |
| Controller Type | Thermostat |
| Power Cord Length | 6 ft |
| Shutter Type | Yes |
| Temperature Range | 32-130 F |
| Motor Protection | Thermally protected |
Airflow Capacity measures the volume of air moved through the system per unit of time, and the 1736 CFM value indicates the volume this unit moves.
Where this sits in the buyer data: Among the 114 products screened for this category, this one’s 4.7 rating places it #2, on 1,338 ratings – above the 446-rating median of that group, so the average rests on more feedback than most of its comparables. On price it undercuts 42 of them.
Before You Buy: Axial Blower Checklist
The iLIVING Shutter Exhaust Fan includes a 6 ft power cord and a standard 3-prong plug, allowing you to plug it into a standard outlet without additional wiring.
- ☐ Measure your available wall space and confirm it fits an 18″ diameter—otherwise, the unit will not mount.
- ☐ Verify your space requires 1,736 CFM—if your needs exceed this, the fan may experience a static pressure overload and fail to move air through long ducts.
- ☐ Confirm your installation site is within 6 ft of a power source—if it is further, you will need to run an extension cord or hire an electrician.
- ☐ Ensure your application does not require a backdraft damper—without one, outside air may enter the building when the fan is off.
- ☐ Check that your environment operates between 32-130 F—the built-in thermostat will not trigger outside of this range.
You should not buy this product if your application requires a high-static pressure industrial blower to move air through dense filtration systems.
What These Specifications Let You Do
How a built-in thermostat regulates temperature for this Axial Blower
The iLIVING 18″ Wall Mounted Shutter Exhaust Fan moves 1,736 CFM of air. This capacity allows you to ventilate a large attic space, a crawlspace, or exhaust steam from a large bathroom, as these areas typically require between 80 and 1,736 CFM. A built-in thermostat controls the fan to operate within a 32-130 F temperature range, which is the range the unit monitors to trigger the motor.
Because the thermostat manages the 3-speed motor, you can maintain specific temperatures without manual intervention. To ensure this fits your needs, measure the square footage of your space and confirm it requires less than 1,736 CFM of air movement.
How corrosion-resistant materials protect this Axial Blower in damp environments
The iLIVING Shutter Exhaust Fan features a corrosion-resistant body and high-grade aluminum shutters. Corrosion resistance is the ability of the material to withstand chemical breakdown from moisture or salt, which is important for longevity in damp environments. These materials allow the unit to function in areas where high humidity or moisture exposure would typically degrade standard metal components.
The high-grade aluminum shutters provide a weather-resistant barrier to prevent backdrafting—the entry of outside air into the building when the fan is off. Because the motor is fully enclosed and thermally protected, the internal components are shielded from the environment while the 18″ fan diameter provides a large surface area for moving air. You should check the material of your existing ventilation to see if it matches these standards for moisture resistance.
Powering this Axial Blower via a 6 ft plug-in cord
The iLIVING Shutter Exhaust Fan uses a plug-in installation and includes a 6 ft cord with a standard 3-prong plug. This allows you to power the unit by connecting it to an approved electrical outlet rather than requiring hardwired installation. The 6 ft cord provides enough reach to connect the fan to a nearby power source without the need for extension cables.
Since the unit includes an AC cable and a standard plug, you can move the fan to different outlets if your space layout changes. This setup simplifies the power requirements for the 3-speed motor and thermostat. Verify that you have an available outlet within 6 ft of your mounting location before you order the unit.
Common Buyer Jobs Checked Against the iLIVING Shutter Exhaust Fan’s Specs
The iLIVING Shutter Exhaust Fan against the jobs buyers ask about, worked out from its listed airflow capacity and a typical need for each job.
| Job | What it takes | iLIVING Shutter Exhaust Fan |
|---|---|---|
| Ventilate a large attic space | at least 400 to 800 CFM | Yes – 1,736 CFM |
| Move air in a crawlspace | at least 100 to 200 CFM | Yes – 1,736 CFM |
| Exhaust steam from a large bathroom | at least 80 to 110 CFM | Yes – 1,736 CFM |
The iLIVING Shutter Exhaust Fan Against Similar Axial Blowers
Comparison to Similar Models
The iLIVING Shutter Exhaust Fan provides a high-volume airflow of 1736 CFM, which is significantly more than the 80 CFM offered by the Homewerks 7146-80-MS Bathroom Fan LED Light.
- The iLIVING 20″ Shutter Exhaust Fan Remote provides a larger 3368 CFM airflow capacity than this 18″ model.
- The Homewerks Worldwide Homewerks 7145-80-HS Dual Speed Bathroom Exhaust Fan is $3.50 cheaper than the iLIVING Shutter Exhaust Fan.
- The Broan-Nutone 668RP Ceiling Bathroom Exhaust Fan Light is $3.80 cheaper than this model.
- The iLIVING Shutter Exhaust Fan ranks first in buyer ratings among the six models compared, with a 4.7 average from 1338 ratings.
If you need a dedicated bathroom light and a smaller 4-inch fan, the Broan-Nutone 668RP Ceiling Bathroom Exhaust Fan Light is the alternative to consider.
What the deciding spec costs here: Measured as price per unit of Airflow Capacity, the reviewed product works out to $0.10 against a $1.32 median across the 82 other screened products that state the spec, and 9 of them deliver more of it per dollar. The cheapest screened product that beats its 1736 CFM is the VEVOR Wall Mount Fan, 18 Inch, 2-pack at $103.99 with 4150 CFM, which is $61 less than this one for more of the spec that decides this category.
Learn more about the mechanics by reading how an axial blower works for optimal airflow.
Setting Up This Axial Blower, and What Support Covers
Getting the iLIVING Shutter Exhaust Fan Running
You must have a standard 3-prong electrical outlet available to power the iLIVING Shutter Exhaust Fan before you begin.
- Unpack the fan and identify the 6 ft power cord and the included standard 3-prong plug.
- Secure the fan to your wall using a mounting bracket that matches the 18″ diameter of the unit.
- Connect the 6 ft cord to a nearby outlet to provide power to the motor.
- Toggle the 3-speed switch to test the airflow and verify the automatic shutter opens as expected.
Warranty and Support: What to Check
Warranty coverage and return policies vary by seller and country, so you must verify the specific terms of your purchase.
- Confirm the motor’s thermal protection functions by checking for heat buildup during a 30-minute run, as this protects the permanently lubricated motor from burnout.
- Verify the 32-130 F thermostat range matches your environment to ensure the fan triggers at the correct temperature.
- Inspect the high-grade aluminum shutters for smooth movement to ensure they provide a proper seal when the unit is off.
Plug the unit into a power source and run it on the highest speed for 10 minutes the day it arrives to confirm the 1736 CFM airflow is moving air as expected before you finalize the installation.
iLIVING Shutter Exhaust Fan Buying Questions Answered
Which fan should I choose for a large attic or crawlspace?
If you need to move a high volume of air, the iLIVING Shutter Exhaust Fan provides 1,736 CFM, which is enough to ventilate a large attic or a crawlspace. This airflow capacity is the volume of air moved through the system per unit of time, and it ensures the volume of air moved meets the needs of large-scale spaces.
Is the iLIVING Shutter Exhaust Fan worth the price for its thermostat?
The iLIVING Shutter Exhaust Fan costs around $164.99 and includes a built-in thermostat control for a temperature range of 32-130 F. This feature allows the fan to activate automatically based on heat, which provides a level of automation not found in many basic models. While the price is higher than non-thermostatic options, the 4.7 rating from 1,338 buyers reflects the value of having a fan that manages its own operation based on the environment’s temperature.
How does the iLIVING Shutter Exhaust Fan handle moisture and debris?
The iLIVING Shutter Exhaust Fan features high-grade aluminum shutters and a corrosion-resistant build. These shutters are weather-resistant, meaning they are designed to withstand outdoor elements or moisture-heavy environments like bathrooms. The fan also includes a fully enclosed motor and a thermally protected motor to prevent damage from overheating during continuous operation.
What is the power requirement for the iLIVING Shutter Exhaust Fan?
The iLIVING Shutter Exhaust Fan uses a 6 ft power cord and a standard 3-prong plug for plug-in installation. You can connect it to any approved electrical outlet without needing a hardwired connection. Because it is a plug-in model, you can easily move the unit or adjust its placement as long as it remains within reach of a power source.
Is the iLIVING Shutter Exhaust Fan Right for You?
Who the iLIVING Shutter Exhaust Fan suits and the jobs it is the wrong choice for, listed below with the reason for each.
Who this axial blower is for, and what it does well
Who the iLIVING Shutter Exhaust Fan suits
- Garage workshop owners — the 1736 CFM airflow capacity and 18-inch diameter provide high-volume air exchange for large spaces
- Homeowners in humid climates — the corrosion-resistant and weather-resistant shutters protect the unit from moisture and outdoor elements
- Workshop hobbyists — the plug-in installation and 6 ft cord allow for easy setup without needing a hardwired electrical connection
- Small greenhouse operators — the built-in thermostat control and 32-130 F range allow for automated temperature regulation
- Commercial kitchen staff — the fully enclosed and thermally protected motor ensures safety and durability in high-heat environments
What this axial blower handles well
- Ventilating a large workshop — 1736 CFM airflow capacity
- Automating temperature control in a shed — built-in thermostat control
- Exhausting fumes in a garage — 3-speeds for adjustable airflow intensity
- Outdoor wall ventilation — weather resistant shutters and corrosion-resistant build
- Quick setup in a basement — plug-in installation with standard 3-prong plug
What this axial blower is the wrong choice for
- High-precision laboratory ventilation — 3-speed limitations may not provide the granular control needed for sensitive experiments
- Extreme heat industrial smelting — 130 F upper temperature limit of the thermostat
- Large warehouse air circulation — 18-inch fan diameter is sized for smaller rooms or specific zones rather than massive industrial halls
What to budget alongside this axial blower, and what to skip
Accessories worth buying with the iLIVING Shutter Exhaust Fan
- Wall mounting hardware — required for the wall-mounted installation
- Exterior wall sealant — needed to seal the opening around the fan housing
- Extension cord — needed if the 6 ft cord does not reach the power source
- PVC or metal ducting — needed if the air needs to be directed further than the immediate wall opening
- Power strip — needed to provide power if the outlet is shared with other tools
Accessories you can skip buying for this axial blower
- Hardwiring kit — skip because it includes a standard 3-prong plug and AC cable
- Replacement motor — skip because the motor is permanently lubricated for long-term use
- Separate thermostat — skip because it features a built-in thermostat control
Where to Buy This Axial Blower
When we looked in November 2026, the iLIVING Shutter Exhaust Fan was listed at $164.99 – a snapshot that may have changed since.
Axial blowers are sold by the retailers below – we do not track which of them has the iLIVING Shutter Exhaust Fan in stock, so check availability and the current price with the retailer before making a trip.
- Amazon (online only) — vast selection of brands and customer reviews
- Build.com (online only) — specialist selection of high-end and commercial ventilation systems
- HVAC Direct (online only) — specialist retailer for ventilation and blower components
- Ferguson (online and physical stores) — professional trade supplies and specialized HVAC equipment
- Home Depot (online and physical stores) — wide selection of residential ventilation fans and in-store pickup
- Lowe’s (online and physical stores) — large inventory of bathroom and attic exhaust fans with trade accounts
Final Verdict on the iLIVING Shutter Exhaust Fan
The iLIVING Shutter Exhaust Fan provides 1,736 CFM of airflow capacity, which measures the volume of air moved through the system per unit of time. This capacity is sufficient to ventilate a large attic space requiring up to 800 CFM or move air in a crawlspace needing 200 CFM. Because it handles 1,736 CFM, it provides the volume necessary for high-capacity ventilation tasks that exceed standard residential requirements.
You should choose this model if you need to exhaust steam from a large bathroom, as the 1,736 CFM rating covers the 110 CFM requirement for that job. The built-in thermostat control maintains a temperature range of 32-130 F, allowing the fan to activate automatically based on heat. The 18″ fan diameter provides the physical width needed to move large volumes of air efficiently.
The iLIVING Shutter Exhaust Fan includes a 6 ft power cord and a standard 3-prong plug for plug-in installation into approved electrical outlets. It features high-grade aluminum shutters that are weather resistant and provide a way to seal the opening when the fan is off. The motor is fully enclosed and thermally protected to prevent overheating during continuous operation.
You can rely on the 4.7 rating from 1,338 buyer ratings as a signal of the user experience for this model. The 1,736 CFM airflow capacity is a primary spec for heavy-duty ventilation, providing the volume required for large-scale air movement.
You should choose the iLIVING Shutter Exhaust Fan if you need to ventilate a large attic or crawlspace and prefer a plug-in installation with automated temperature control for around $164.99.
Skip it if: You require a hardwired installation without a power cord or need a fan with a higher static pressure capacity for extremely long duct runs with high resistance.