How does the EU70 Swimming Pool Heat Pump impact electricity costs?

You must confirm your pool is no larger than 6,500 gallons and check your home’s electrical capacity before installation. A qualified installer should verify your local wiring requirements to ensure the system receives consistent power.

High COP of 4.7 reduces electricity costs for the EU70 heat pump

The Coefficient of Performance (COP), which measures the efficiency of heat produced relative to electricity consumed, is 4.7 for this unit. This efficiency level is critical for pool owners because heat pumps run for extended periods to maintain water temperature, making every decimal point of efficiency a direct reduction in monthly utility bills. We selected the EU-PLC57100-E Heat Pump for this review because it offered a high COP among the above ground pool options we compared. The unit provides a maximum output of 22,462 BTU/hr and supports water temperatures up to 105F. While the data does not state the specific circuit breaker size required, you should verify if your electrical panel can support the high-draw requirements of a 22,462 BTU/hr system.

For additional technical questions, see the EU-PLC57100-E Heat Pump FAQ.

What to Check Before Buying the EU-PLC57100-E Heat Pump

Verify these technical requirements to ensure the heat pump operates efficiently and safely in your specific environment:

You can find the detailed EU-PLC57100-E Heat Pump specifications in our full breakdown.

• Confirm your pool volume does not exceed 6,500 gallons to prevent the unit from running 24/7 without reaching the target temperature.
• Check that your pool pump provides a consistent flow rate, as slow water movement can cause the heat pump to cycle inefficiently.
• Verify your existing plumbing pipe diameter and material to ensure there is no excessive pressure drop that could strain the system.
• Ensure your outdoor space allows for the 76-pound unit to sit in an area that stays between 30F and 100F.
• Consult a professional to determine if your current electrical infrastructure supports the necessary voltage for the heat pump.

Comparing the EU-PLC57100-E Heat Pump to Other Options

The EU-PLC57100-E Heat Pump is a machine that uses outside air to warm your swimming pool water. Buyers looking for massive industrial-scale heating or high-BTU output for large commercial bodies of water should look at alternative systems. This model is designed specifically for above ground pools where the 6,500-gallon capacity limit is the primary constraint. If your pool requires a much higher heating rate than 22,462 BTU/hr, you may need a larger unit with a different power profile.

If you have a compact space, browse the top-rated small pool heat pump options.

You should choose the EU-PLC57100-E Heat Pump if you have an above ground pool under 6,500 gallons and need a highly efficient way to maintain water temperatures up to 105F. It is a strong choice for those prioritizing a high COP to keep electricity costs manageable during the swimming season.

Larger installations may require viewing our comparison of high-capacity pool heat pumps.

Reviewed by the Refrigerant Recovery Pro editorial team. Refrigerant Recovery Pro writes these guides from the 200 most-reviewed swimming pool heat pump listings in our retail dataset, not from manufacturer copy.